FrankWest107 Posted January 26, 2014 Share Posted January 26, 2014 Are these available? or does ones have to find original parts in junk yards and other cars? Link to comment Share on other sites More sharing options...
Steve Braverman Posted January 26, 2014 Share Posted January 26, 2014 What do you need? There are lots of repro parts for 1934 Chevrolets. Check the Filling Station.https://www.fillingstation.com Link to comment Share on other sites More sharing options...
FrankWest107 Posted January 26, 2014 Author Share Posted January 26, 2014 What do you need? There are lots of repro parts for 1934 Chevrolets. Check the Filling Station.https://www.fillingstation.comTransmission gears, and rear axil for chevy master Link to comment Share on other sites More sharing options...
sambarn Posted January 26, 2014 Share Posted January 26, 2014 Frank, That's going to require a parts car but shouldn't be too hard to find. Link to comment Share on other sites More sharing options...
Jon37 Posted January 26, 2014 Share Posted January 26, 2014 Generally you'll find that there are "networks" not only for particular marques (like Chevy), but also for eras, models or even a years of that marque. Once you buy the car, try to tap into such a network. It may be a club, a chapter in that club (one dealing with particular years, not geographical areas) or even a non-organized group of people within (or outside) the club. Or even a "group" on the internet. Once you're a part of that network, you'll find that fellow members will often bend over backwards to help you find your part or share technical knowledge with you, because you all share an interest in the same type of car. All the available parts "out there" are not necessarily advertised for sale!If someone simply follows the standard procedures in his parts search (combing the ads in Hemmings, posting parts needs at various internet forums, contacting well-known parts vendors) and he doesn't attempt to tap into the network, he ignores an invaluable tool for finding parts (and good friends too). Link to comment Share on other sites More sharing options...
Guest Commodore Posted January 27, 2014 Share Posted January 27, 2014 You should post your question on the Vintage Chevrolet Club of America forum. See link. It wouldn't hurt to join the club too. A make specific club has lots of advantages. My interchange manual says for transmission the that you should look for 1933-36 Master and 1/2 ton truck (not W. M. Warner transmission), Pontiac P6 to engine # 6-46474, Pontiac P8 to engine # 8-27162 and GMC 1935-36 T14 1/2 ton truck. The rear axle is 1933-35 Master and 1/2 ton truck. The 1936 Master, 1/2 ton truck and GMC 1936 T14 1/2 ton truck can made to fit by machining an offset on inner side of flange to fit 1934 brake drum.http://vcca.org/forum/ubbthreads.php/forums/2/1/1933-36 Link to comment Share on other sites More sharing options...
Buchans Bread Posted January 27, 2014 Share Posted January 27, 2014 (edited) I have found Jim Carter to be a good source, as well. http://www.oldchevytrucks.com/ I agree with the above statement regarding VCCA. Another 'treasure chest' is the Stovebolt Forums http://www.stovebolt.com/ubbthreads/.Best of Luck! Edited January 27, 2014 by Buchans Bread additional information (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now