Beltfed Posted December 18, 2012 Share Posted December 18, 2012 The headlight reflectors are yellow/discolored and light output is dim at best. I have read that the reflectors may be polished with 'lamp black'. As I am fresh out of lamp black;) I was thinking of using baking powder or something like that to polish. What have you used to shine these puppies up? Thanks. Link to comment Share on other sites More sharing options...
ply33 Posted December 19, 2012 Share Posted December 19, 2012 You could probably use the soot from the flame of a candle. I think you want a really mild abrasive and suspect that baking powder would be too harsh. Link to comment Share on other sites More sharing options...
Beltfed Posted December 20, 2012 Author Share Posted December 20, 2012 Instead of a candle how about the soot from an acetylene setup with the oxygen turned off? Thanks. Link to comment Share on other sites More sharing options...
ply33 Posted December 20, 2012 Share Posted December 20, 2012 Instead of a candle how about the soot from an acetylene setup with the oxygen turned off? Thanks.That sounds like a great source of lamp black.Re-reading your original post, I am wondering if the original silver has been worn away over the years and that yellowing is the underlying brass starting to show through. If so then cleaning and polishing might not get you where you want to be. Worth a try though as it is cheap and easy to do first. Link to comment Share on other sites More sharing options...
Beltfed Posted December 20, 2012 Author Share Posted December 20, 2012 I don't know yet as I've only looked through the lens. The amount of light being emitted make me not want to drive after dark. I'm dealing with other issues right now (see my postings). I took most of yesterday just making the pieces that hold the wiper towers to the cowl. Today the gaskets and so on. Thanks. Link to comment Share on other sites More sharing options...
Beltfed Posted December 20, 2012 Author Share Posted December 20, 2012 I just found this on another forum and it maybe the ways to go.Model A Ford Garage ~ Cleaning Silvered Plated Model A and B Reflectorsmaybe even a tech tip. Link to comment Share on other sites More sharing options...
ply33 Posted December 20, 2012 Share Posted December 20, 2012 I just found this on another forum and it maybe the ways to go.Model A Ford Garage ~ Cleaning Silvered Plated Model A and B Reflectorsmaybe even a tech tip.Sounds like an interesting process and worth trying.However if the silver has been worn off over the years you'll be looking at repair rather than cleaning. You may also have corroded contacts and wires that will dramatically reduce your light output. My whole saga on lights for cars of that era is at How good can those antique car headlights be? Link to comment Share on other sites More sharing options...
Beltfed Posted December 20, 2012 Author Share Posted December 20, 2012 Thanks for the information you provided. When I get these 'dog gone' wipers working I plan on taking on the lighting/electrical system. Link to comment Share on other sites More sharing options...
v12lincoln Posted December 23, 2012 Share Posted December 23, 2012 If you have time and dont mind spending a little money on your reflectors, I have the email to a place in Oregon that applies aluminum to your reflector under some process that they use for NASA equipment. once applied it never needs polised and the light given off by a 50cp light is as bright as any new car with halogen.The only problem is the expense. You first have to get your reflectors resilvered then send them to this place and they do their magic and then return them. I think it is another 125 per reflector. If its something your interested in PM me and I will post it here.I plan on having it done to my 32 Buick as soon as I have the money and time to do it. Link to comment Share on other sites More sharing options...
ply33 Posted December 23, 2012 Share Posted December 23, 2012 If you have time and dont mind spending a little money on your reflectors, I have the email to a place in Oregon that applies aluminum to your reflector under some process that they use for NASA equipment. once applied it never needs polished ....That would be Uvira. I had my reflectors done by them decades ago and they are still good. I mention them on my web page and give contact information. Link was posted in an earlier response on this thread but I'll link again: How good can those antique car headlights be? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now