Mutt's37Buick Posted November 21, 2012 Share Posted November 21, 2012 Are the rear fenders for 1937 Buick Roadmaster interchangeable with any other make/model?Thanks Link to comment Share on other sites More sharing options...
Guest Grant Magrath Posted November 21, 2012 Share Posted November 21, 2012 A 38 Roadmaster I'd say.CheersGrant Link to comment Share on other sites More sharing options...
1939_Buick Posted November 21, 2012 Share Posted November 21, 2012 (edited) Will look up parts book tonight (you should buy one)I think 37-38-39 series 80 & 90 basic body shells are essentially the same as some Caddie's. Same as for 1939 S40 S60 body shells, doors, rear fenders being basically same as some Olds, Pontiac, LaSalle & Caddie's [GM B series body]Part numbers may be different due to drilled - punched holes for trim, gas filling noozle, etc, being in different places Edited November 22, 2012 by 1939_buick (see edit history) Link to comment Share on other sites More sharing options...
Mutt's37Buick Posted November 21, 2012 Author Share Posted November 21, 2012 Thanks to you both for your help.Mutt Link to comment Share on other sites More sharing options...
1939_Buick Posted November 22, 2012 Share Posted November 22, 2012 (edited) Now have access to 1928-41 Master Parts bookBuick 1937 S80 & S90 are the sameBuick 1938 S80 & S90 and 1939 S80 & S90 are the sameBuick 1940 S80 & S90 are the same However I would check with others, if you can, to determine if they fit from year to year. Try Dave T ?Body is same / very similar with the 2 piece rear window and exposed door hinges front & rear. On the lesser series door hinges, over time, went into the body. Rear window1 piece from 1939==We like images. Making an album in "my profile" lower left side is easiest Edited November 22, 2012 by 1939_buick (see edit history) Link to comment Share on other sites More sharing options...
Mutt's37Buick Posted November 22, 2012 Author Share Posted November 22, 2012 Thanks again for your help.Mutt Link to comment Share on other sites More sharing options...
Dynaflash8 Posted November 22, 2012 Share Posted November 22, 2012 Cadillac had a body that was the same as the Buick, and the passenger side may fit. Driver's side probably does not have the gastank door on a Cadillac. This is true for the Buick series 40-60. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now