Are rear fenders for 1937 Buick Roadmaster interchangeable with any other make/model?

[Mutt's37Buick]

Are the rear fenders for 1937 Buick Roadmaster interchangeable with any other make/model?

Thanks

[Guest Grant Magrath]

A 38 Roadmaster I'd say.

Cheers

Grant

[1939_Buick]

Will look up parts book tonight (you should buy one)

I think 37-38-39 series 80 & 90 basic body shells are essentially the same as some Caddie's.

Same as for 1939 S40 S60 body shells, doors, rear fenders being basically same as some Olds, Pontiac, LaSalle & Caddie's [GM B series body]

Part numbers may be different due to drilled - punched holes for trim, gas filling noozle, etc, being in different places

Edited November 22, 2012 by 1939_buick (see edit history)

[Mutt's37Buick]

Thanks to you both for your help.

Mutt

[1939_Buick]

Now have access to 1928-41 Master Parts book

Buick 1937 S80 & S90 are the same

Buick 1938 S80 & S90 and 1939 S80 & S90 are the same

Buick 1940 S80 & S90 are the same

However I would check with others, if you can, to determine if they fit from year to year. Try Dave T ?

Body is same / very similar with the 2 piece rear window and exposed door hinges front & rear.

On the lesser series door hinges, over time, went into the body. Rear window1 piece from 1939

==

We like images. Making an album in "my profile" lower left side is easiest

Edited November 22, 2012 by 1939_buick (see edit history)

[Mutt's37Buick]

Thanks again for your help.

Mutt

[Dynaflash8]

Cadillac had a body that was the same as the Buick, and the passenger side may fit. Driver's side probably does not have the gastank door on a Cadillac. This is true for the Buick series 40-60.