MikeC5 Posted July 21, 2012 Share Posted July 21, 2012 These had already been disassembled from the car when I bought it (so it isn't a failure to take photos before).. Can anyone please post a close up of how these buggers are supposed to go on there? And I seem to recall that the front and rear ones are different and am not sure which is which... Link to comment Share on other sites More sharing options...
Pete K. Posted July 21, 2012 Share Posted July 21, 2012 Hey Mike, Here's the right side of car's hood latches, doing their thing. I measured the lengths and they are all the same. They use big flat head slotted screws with square nuts under the hood shelf. Link to comment Share on other sites More sharing options...
Texacola Posted July 21, 2012 Share Posted July 21, 2012 (edited) Mike, As Pete said they are the same length.The difference is in the orientation of the mounting holes.Pete's pic shows the rear latch with the holes under the hook (toward the hood.The fronts mount with the holes behind the hook(toward the fender).Hope thats somewhat clear.Bill Edited July 21, 2012 by Texacola (see edit history) Link to comment Share on other sites More sharing options...
Pete K. Posted July 21, 2012 Share Posted July 21, 2012 Bill, Thank you for helping out. I think the mounting bracket orientation is what Mike was probably asking about too, and I omitted mentioning it!!(sorry mike). Link to comment Share on other sites More sharing options...
MikeC5 Posted July 21, 2012 Author Share Posted July 21, 2012 Thanks for the help brothers.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now