Guest Beqa diver Posted June 30, 2012 Share Posted June 30, 2012 Thank you all for your help so far with my car. My brother and I think we have found out what is causing the clutch from releasing. Please look at the picture and you will see that there is a gap of about 3/8"+ or 9.52mm that is between the clutch shaft and the speedometer drive gear. If we fill the gap with a screw driver, the clutch releases perfectly. We are trying to figure out if we can shim the sliding gear shaft in the speedo gear or should we shim at the thrust washer?I guess we might be looking at this all wrong any help would be appreciated...Greg Link to comment Share on other sites More sharing options...
keiser31 Posted June 30, 2012 Share Posted June 30, 2012 See if Nina the cat took some of your parts...sounds as if something is missing. Link to comment Share on other sites More sharing options...
Guest Tsunamibob Posted June 30, 2012 Share Posted June 30, 2012 I questioned Nina and she denies taking any parts... It seems that the sliding gear shaft is short. Link to comment Share on other sites More sharing options...
R.White Posted June 30, 2012 Share Posted June 30, 2012 This might be one for Rodger Hartley? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now