Help needed for standard six 1925 rear wheel to remove

[tevel]

Hello,

I need to pull my left rear wheel to replace the axel shaft bearings but cannot succeed to.

I removed the cap and the shaft nut, but the wheel flange refuses to come out.

Is there a special tool I need to use for?

Any idea on the way to hav it out sshould be moree than welcome.

Many thanks in advance for your help.

JJ.

[huptoy]

Please list the make and model of the car.

Do have wire wheels or wood wheels

Take a photo of hub and post it.

If you have screw on hub caps, measure the size of the hub with a caliper.

They will be 2 1/2 or 2 /3/8 or 2 5/8 etc.

You can purchase a bell shaped wheel puller threaded inside.

If you have bolts & wheel nuts, you will need a different kind of wheel puller.

[tevel]

Hello Huptoy,

Many thanks for your help.

I built a wheel puller upon your recomendation, and succeeded to have the wheel out.

Thanks again for the advise.

Have a grea day.

JJ.