MikeC5 Posted July 11, 2011 Share Posted July 11, 2011 I can't seem to get the gear shift lever to come off the trans. on my '25. Any tricks to doing this? I just want to clean it up and repaint it. Link to comment Share on other sites More sharing options...
RickBrinker Posted July 12, 2011 Share Posted July 12, 2011 You have to pull the top of the Transmission.I wouldn't try to take the lever out of the Trans.once you have it out. Link to comment Share on other sites More sharing options...
MikeC5 Posted July 12, 2011 Author Share Posted July 12, 2011 I had the top off a month ago and it didn't seem to be any place to disconnect it under there. Link to comment Share on other sites More sharing options...
dwollam Posted July 12, 2011 Share Posted July 12, 2011 I'm with Rick. I think it is a real can of worms to remove the shifter. Is there something wrong with it? Link to comment Share on other sites More sharing options...
RickBrinker Posted July 12, 2011 Share Posted July 12, 2011 You have to remove the spring in the shift tower.Removing the spring is a Bi$*h Link to comment Share on other sites More sharing options...
MikeC5 Posted July 12, 2011 Author Share Posted July 12, 2011 That bad? I just want to refinish it. I guess I can do it in-situ or at least take off the top cover and wrap up the guts in rags while I scrape and sand. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now