tcslr Posted June 5, 2011 Share Posted June 5, 2011 How is the handle on the window crank removed? The nut is 1 1/16 and I see a small hole - almost like a set screw - but with no screw. The problem is the crank does not open the window. Upon removal of headpiece I see the passenger side gear is not mating with the slide. Or if anyone has a suggestion about that... that is the heart of the matter.Thanks in advance.Tom Link to comment Share on other sites More sharing options...
broker-len Posted June 9, 2011 Share Posted June 9, 2011 what car are you working on ? Link to comment Share on other sites More sharing options...
Guest noncompos Posted June 10, 2011 Share Posted June 10, 2011 Not familiar with any window crank with a nut on it; that being said, in many 30's/40's, where the window crank had a spring loaded bezel, you pressed in the bezel, and that uncovered the little hole in the crank handle. It was for a little recessed pin; you simply shoved the pin all the way out with a slightly smaller wire and the handle slipped right off the window gear shaft.It sometimes took two to reinstall: one to push the bezel in against the spring (which is inside the upholstery backing) while another lined up the hole on the handle with the hole in the shaft and pushed in the little pin. HTH Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now