Steve Braverman Posted May 29, 2010 Share Posted May 29, 2010 Did the PA come with a thermostat? Mine does not have one, the owners manual does not show one, but I've seen listings for them and a spare head I have has a thermostat in it. Link to comment Share on other sites More sharing options...
ply33 Posted May 29, 2010 Share Posted May 29, 2010 The 1928-33 Plymouth Master Parts List lists part number 391269 as the thermostat for the 30-U, PA and PB.While I can give you modern equivalents for the thermostat used in 1933 (part number 612048) I don't have a cross reference for the earlier one. If you could get the number off the one in your spare head and/or get a modern match for it I would love to add it to my parts database at Plymouth Replacement Parts Link to comment Share on other sites More sharing options...
Guest broker-bob Posted June 1, 2010 Share Posted June 1, 2010 It should have a thermo I have them bobnroman@yahoo.com Link to comment Share on other sites More sharing options...
broker-len Posted June 8, 2016 Share Posted June 8, 2016 looking for a PA thermostat bobnroman@yahoo.com Link to comment Share on other sites More sharing options...
dix40 Posted June 9, 2016 Share Posted June 9, 2016 I couldn't get my PA up to temp. Pulled the thermostat and replaced it with a modern one. Works fine now. Just matched thr overall OD. NO problem. The original was a style I never saw. It was a cylinder shaped accordian. Like a bellows. I see them on ebay. I guess they work on air expanding to open the gate. Too fragile. The new ones can't be seen. Link to comment Share on other sites More sharing options...
broker-len Posted June 9, 2016 Share Posted June 9, 2016 did you put a 180 in do you now what the specs are Link to comment Share on other sites More sharing options...
broker-len Posted June 10, 2016 Share Posted June 10, 2016 Help------trying to find a thermo that will work got one at NAPA but hole is too small and even when it opens the block is hot and top rad hose is cooler and it over heats--------the picture is the kind I think I need it measures 2 3/10 on dial caliper but will not go into my thermo housing Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now