REATTA HEADLIGHT motor rebuild kit UPGRADE !!

[Guest camarobuyeratyahoo]

THERE ARE FEWER AND FEWER REATTA HEADLIGHT MOTORS AVAILABLE OUT THERE . OR ANY PART FOR THAT MATTER . FOR AROUND $10 YOU CAN REPAIR THEM WITH AN UPGRADE ALUMINUM HEADLIGHT MOTOR KIT . IT IS VERY WELL MADE .

THESE PARTS ARE TOTALLY DIFFERENT DESIGN THAN THE OEM (CRAPPY) DELRIN BUSHINGS .

IF YOUR LIGHTS ACT FUNNY , HAVE CLUNKING NOISES , OR SEEM LIKE THE GEARS ARE STRIPPED . THIS IS THE PART YOU NEED TO FIX THEM . ALSO CHECK THE ARM , THESE DO TEND TO ROUND OUT ON REATTAS . GOOD LUCK IF YOU HAVE THAT PROBLEM MY FRIENDS.

MANY PEOPLE BUY A NEW GEAR THINKING THAT IS THE PROBLEM ,

ONLY TO FIND THE ORIGINAL GEAR IS GOOD AS NEW !! BUT THE BUSHINGS HAVE TURNED INTO HARMFUL CHUNKS AND DUST !!

THERE ARE ONLY 2 PLACES YOU CAN GET THIS PART , LOOK UP dragonstreasurehorde on Ebay or powerwindowrepairkit Both have outstanding feedback. Buy safley !!

[Barney Eaton]

GM put those plastic rollers in there for a reason, otherwise there would be a direct drive. The plastic roller design appears to be a clutch if the headlight are stuck shut with snow/ice. By replacing the plastic parts with a hard material like aluminum, there is a strong risk of breaking another (more expensive) part. The plastic rollers are cheap and if they fail, replace them again.