STuTZ693 Posted July 26, 2009 Share Posted July 26, 2009 We have removed the old top material on our 1925 roadster and have a lot of tag and nail holes along with some split wood to repair. The from header is the worst.Any suggests and methods on how to prepare the wood for new tags? Link to comment Share on other sites More sharing options...
Mark Shaw Posted July 26, 2009 Share Posted July 26, 2009 I just did this on a 29 Buick with epoxy. It will take staples and tacks.... Link to comment Share on other sites More sharing options...
Tom M Posted July 27, 2009 Share Posted July 27, 2009 I believe others on here have had good luck using this product Kwik Poly Link to comment Share on other sites More sharing options...
Friartuck Posted July 27, 2009 Share Posted July 27, 2009 I too have used Kwik Poly for filling nail holes in wood. Good feature for Kwik Poly is its low viscosity (like water) which soaks into wood fibers before it hardens. Use small 3 OZ paper cups for mixing, disposable rubber gloves and "index finger over the stray" method to extract small amounts from the cans. Be sure to use seperate colored strays as not to contaminant the A and B parts of Kwik Poly. You may also have to use masking or duct tape to make 'mini troughs or dams on vertical surfaces. Link to comment Share on other sites More sharing options...
Bill Boudway Posted July 29, 2009 Share Posted July 29, 2009 Hi,You can also use toothpicks dipped in the epoxy.I use West product.Good lock!Bill Boudway Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now