NEED TO HAVE MADE A IGNITION POP-OUT

[mikzjr@aol.com]

I HAVE A 29 CHRYSLER WITH A ELECTRO-LOCK POP-OUT IS THERE ANYONE THAT CAN MAKE ME A NEW KEY POP-OUT CYL. MIKE

[HarryJ]

Mike, I have an Electro-lok switch on my '28 and need some help on restoring the pot metal parts of this switch. I'm glad you posted this.

[hddennis]

Mike & Harry, aren't you both talking about the type coils that mount in the dash and have the switch on the end of the coil sticking through the dashboard? I don't know if you saw my post on Atwater-Kent coils but the box came with a piece of their literature advertising that they manufacture coils for 1929-32 Chryser products.

Instead of people running all over I'm just going to put the contact info here.

Atwater-Kent Manufacturing Company

12 Jacques Street

Worcester, Massachusetts 01603

Phone Mike at 1-508-792-9500

Tell him the nut with the Maxwell coils sent you!

[HarryJ]

hddennis....No these are not coils,but armored ignition cables...I did read your post about Atwater-Kent..have they come back from the dead?

[Steve_Mack_CT]

Harry or Mike, do you know how these differ from the Electrolok cylinders used by Fords from the same era? There are several people that rebuild these including I believe A&L here in CT (they can also provide NOS keys). These units could be very similar, if so, you may be able to get assistance from one of these guys. A quick post on Ford Barn or Ahooga may be a good step.