Scott: I googled 1922 studebaker big six and looked at the images. There is an image of a bigsix with the rain shield at the following address: Google Images I don't know the exact dimensions but the two holes into which this inserts are about 41 1/2" apart. It looks like the metal frame surrounds three sides of the glass. Tom Imig 913-302-0518
I would like to buy king pins and bushings to rebuild the steering knuckle on my 1922 EK. Part numbers are: 105869 Steering knuckle upper pin 105418 Steering knuckle lower pin 39194 Steering knuckle lower pin cotter key 105367 front axel bushing If you have these available for sale or know of a source please drop me a line. Thanks Tom
I'm looking for the chrome knob with a concave center that fits a Roadmaster radio. If you have an extra one that you can sell, please contact me. Thanks Tom
Thank you Frank. I didn't find what I needed in Dormans but a place called Fasteners Inc. (Fasteners Inc, 1 Stop Industrial Source, Cable Wire Rope, Riggings) sells 7/16-20 grade 8 threaded rod in 3' lengths and I can made the studs from that. Tom
I am looking for new cylinder head studs for my 1922 Big Six Studebaker. I tried reusing the old ones but several have stripped when torqueing the head. They are 3 1/2" long and 7/16" diameter with fine threads (20/inch) on both ends, grade 8. I haven't found any yet in the internet searches that I've done. Thanks Tom
I just bought a 1940 60 special that has a wood grained dash that appears original. I think they may have been made either wood grained or painted. If you are still interested, I could send you a photo. Tom
I found a downloadable copy of this manual on the internet a while ago but have lost track of it. If anyone knows the URL, I would appreciate receiving it. Thanks Tom
I found a downloadable copy of this manual on the internet a while ago but have lost track of it. Does anyone know the URL where it can be found? Thanks Tom
I am looking for the carburetor air heater to carburetor intake conduit tube that was used with B & B Carburetors. This is the tube shown in the picture. If you have one that you want to sell, please let me know. Thanks Tom Imig
I am looking for the carburetor air heater to carburetor intake tubing that was used with the B & B carburetor. It is part number 35490. This tube is shown in the picture below. If you have one that you would like to sell, please let me know. Tom Imig