studerex
-
Posts
862 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by studerex
-
-
2 hours ago, Jet Doc said:
Rex,
Did you include the serial number, and body number of the '31 that went to Chile?
Jeff
Yep, It's in the roster.
-
Jeff
I know just where they are. Have several. Will trade for labor.
-
Let me know if you bought the ebay one. I did find some in the shop.
-
Too cold to go searching in the pole building. Here is one on ebay at a fair price.https://www.ebay.com/itm/Vintage-6-Volt-Delco-Remy-Generator-With-Voltage-Regulator-And-Water-Pump-Fit/352246092874?hash=item520380d44a:g:rYkAAOSwZW5aLgON
-
Kind of hard to find. I have had 7. A 32 will fit also. As well as 31 and 32 commander which is 3 1/2 wide. The pres is 4 inches wide. Care to share name for the roster?
-
I should have several 955c but will have to check condition. Are you missing yours or just want a rebuildable one?
-
those levers are in the incorrect location. That is Jim Heinsons old car.
-
How about I sell you a rust free 29 president sedan body and you will have all you need to extend it.
-
1
-
-
look again
-
riwire.com
-
It was built May of 1928 by the motor casting date. H-5. That rear bracket is for a trunk rack.
-
5 hours ago, alsancle said:
I like the 31 a lot. But isn't the 32 the "holy grail"?
The dictionary describes it as an object or goal that is sought after for its great significance. That is different for every collector. I have both, so some might say the 33 is the Holy grail. But not to me. Had one and sold it. There are 54 31 president roadsters, 8 of the 32, and 2 of the 33. Some like the 31 for its true roadster look and the 32 for the classic look. Both are great cars.
-
Buy them from John Cislak. http://stores.ebay.com/Pierce-Parts-Store
-
Buy the print from the museum or ask Tom Shrock to make it.
-
I see some Hens teeth hanging on the wall. Also what is that yellow car in the back round?
-
I've seen 2 other Canadian 35s that had that tag in the same place and started with CS.
-
Contact Dick Quinn for manuals.
-
John McCall makes the wing nut. Well he has the inventory of Lionel Stone that had them made.
-
Just leave him a email at the jm studebaker site. his phone number won't help much. I have his new number but he only answers 1 out of 20 times. But he did answer my text to his new number. He is doing a 32 floor mat for me now. Hopefully by the national meet.
-
-
I've gotten the top boot prints from the studebaker museum for my 29, 31 and 35. They might have yours too. Supply them the part number in your book.
-
I didn't think that there were that many Studes were in GB.
-
Those heads are for the 250. We still have to plan a trip to pick up the stuff left behind.
-
George Martin in Lebanon PA. I first meet him at Hershey and he was advertising in Hemmings. I have a telephone number of 717-273-9502 He has made several for my 31 presidents. He has the specs to made stock ones, but you might have to send him a sample or give lengths of cable and sleeves. He might have the ends or you will have to supply yours.
Rex
See http://forums.cadillaclasalleclub.org/index.php?topic=107198.0
1931 Studebaker President wheels
in Studebaker, Erskine & Rockne
Posted
Tom, is yours a president?