J Tryloff

I have sold this car and the parts car. They were replaced with an already restored 1970 country squire. I have found this to be the cheapest option. I will post a picture of the new car once it arrives. The new car has plenty of things I can repair and maintain on it, but it does not need a full restoration like these two did.

Put me down for one or two special six gaskets. I will pick them up and drop off some clutch parts.

I have a line of a set of valves .005 oversized stems. I forget the price but I think it was fairly reasonable. If interested I will message you the gentleman's contact info.

My 23 special six had a lot of leaking around the spark plugs and where the intake manifold seals to the engine.

What is the gasket type material that goes between the engine and the splash pans? Mine is deteriated to the point of bring unrecognizable. I am assuming these pans were painted black? Thank you in advance.

Thank you both for the information!

I was unable to find part numbers for these, but these are the parts I am searching for.

I am looking to purchase 1 clutch spring, and 1 intermediate plate. I would also purchase an entire parts clutch assembly if available. One of my springs is bent, and my intermediate plate is worn very thin, with less than 1/3 or the original disk remaining. I will post pictures and measurements either later tonight or tomorrow morning, depending on when I get home from work tonight.

Thank you all for your help. I was able to source a set of NOS style gaskets.

I'm in ohio as well. I need the piece that rides on the cam. At least 3 of mine show pretty decent ware. I'd be willing to get in line behind axial, as this was originally their post.

Thank you very much Stude Light. Would you have the intake gaket part number as well?

Would you happen to have part numbers for a 24 model year? I am unable to locate a 24 and older parts manual, only 25-29

Do you have pictures or know that material / thickness of the original gaskets? I would like to not put this one on if I don't have to. Also, any information on the gaskets or lack of at either end of the cylinders? Thanks in advance