-
Posts
19 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Everything posted by Mark62
-
Rodneyâs 1963 Buick Skylark convertible
Mark62 replied to rodneybeauchamp's topic in Me and My Buick
You will have years of trouble free with those new cylinders. Mine has the clear lines now too, so you can see the pump fluid, but you have to be extra careful because they can bend and kink more easily than the originals. -
Rodneyâs 1963 Buick Skylark convertible
Mark62 replied to rodneybeauchamp's topic in Me and My Buick
Here is another picture through the back window. The clips behind the seat allow you to remove the liner and access the pump motor from the back seat. The other end is looks like itâs permanently attached underneath the rear top chrome trim. -
Rodneyâs 1963 Buick Skylark convertible
Mark62 replied to rodneybeauchamp's topic in Me and My Buick
Hi Rodney, they are the clips for the well liner, it protects the convertible top from sitting on the pump cover and provides a barrier from any items in your trunk. Happy New Year! -
Hey Jacob, if you decide to keep the original wheels, I found Maxxis P185/80/13 on Amazon for about $125 each, cheaper than the Coker brand. Firestone made that size in the past, but not anymore. Also, I have an original 62 Special Deluxe convertible, it has the 215 V8, but if you need any pics of how things came from the factory I would be than more than happy to send. Thanks, Mark
-
Thanks Ben, good to know itâs working as designed.
-
Hey Rodney, installed my first Speedhut temp gauge. I put the sensor in the upper radiator hose, used an adapter and grounded to engine, as to keep the factory light. I did have a question about the gauge, when I turn the key to off the needle stays at the most recent position, not returning to zero. Is that normal? I have it powered to an accessory where it powers up only with the key on. Thanks a bunch.
-
Great looking car, canât go wrong with a black rag topđ
-
Very nice custom gauge mount, I went with the black face too to match the current dials and help with the glare from the sun here in Florida.đ
-
Thanks Rodney, I went to a family owned local auto parts store and would you believe they had a box of Series 56 brass terminals and housings behind the counter. 40 cents each! BTW, I designed and ordered my first Speedhut Temp gauge, canât wait till it gets here. lol
-
Thanks so much Frank that really helps, the âfranchiseâ parts store hadnât a clue when I showed them the terminals in the pic. I do have a open barrel crimper so I can see what I am doing. This is my first car from the early 60âs, so trying to keep as original as possible, being a novice historian.
-
Any idea where I can find original type wire connector housing and / or quality terminals. Lots of cheap thin parts out there, looking for some quality parts to show respect to the old girl. đ
-
Rodneyâs 1963 Buick Skylark convertible
Mark62 replied to rodneybeauchamp's topic in Me and My Buick
Perfect, thanks so much! -
Rodneyâs 1963 Buick Skylark convertible
Mark62 replied to rodneybeauchamp's topic in Me and My Buick
Also Rodney, where did you run your wires through the firewall, was there an existing grommet or did you have to make a hole. I canât see on mine there is quite a bit of old black adhesive on mine. Thanks for answering all the questions, since you have had your car apart, quite impressive. -
Rodneyâs 1963 Buick Skylark convertible
Mark62 replied to rodneybeauchamp's topic in Me and My Buick
Thanks Rodney it does, makes sense with the t-fitting for the pressure sensors. I researched the steppers and the digital tech is very accurate. I agree with your early post, when I go to cruise in events here in Florida, out of 150-200 cars, I am the only Special convertible too among many Mustangs and Corvettes. lol -
Rodneyâs 1963 Buick Skylark convertible
Mark62 replied to rodneybeauchamp's topic in Me and My Buick
Rodney, nice work on your custom gauges. Did you use the existing port that holds the temp light sending unit or is there another spot on the 215 so you can have both the warning light and temp gauge. Are your gauges mechanical or electrical? Thanks, Mark -
Very nice car, I like the color combo. The Skylark has the 4 barrel carb and they didnât make a 61 convertible and the 63 has a different body style, is that correct?
-
-
My trim code is 140, could not find any references to that color, it looks original, but I am not sure. Also was the undercoating a dealer or factory applied, itâs still pretty much intact after 60 yrs. Any help would be greatly appreciated.