Devilbuick41

Cool. What does the other side of it look like?

Thanks Rex, Can you message me with the price for a window crank and posting?

Perfect, thanks. Is this just held on by a clip?

Does anyone have a cover for sale or pictures of a cover - front and back so I can consider fabricating one? Thanks, Steve

Does anyone have one of these for sale? (just the window crank not the escutcheon). Thanks.

Yep.

After refitting my rebuild water pump it keep spewing water when the engine is running. We've nipped up the nut (B30-9) in the diagram but it keeps coming loose when the engine is running - any ideas on a fix? Thanks.

Thanks for the kind words. And she's home! A bit of a squeeze in the garage!! Now to fix the rebuilt waterpump (see separate thread), do the interior and register it.

Latest progress - almost there, just waiting on new screen fitment and then to register it in the UK!

Hi, I went to see Greg Diffen and his 1933, taking this picture as the hinge support is missing on mine. Hope its of use.

Hi Rex, Its a Stewart Warner electric gauge. It would be good if the Ford unit would work but wanted to check the Omh range was the same. Thanks

I've finally had a response but not what I was expecting 😲 "We do not know of anyone selling a combination fuel sender. We could build you a custom direct\electric fuel sender, we would need some more information on that. The estimated cost would be around $1,200usd. and about 3 months to build." Any other options out there?

Is anyone else able to contact KM Lifestyle for me, I suspect that they may not want to deal with overseas shipping etc at the moment as I'm from England. Or, if anyone knows the Ohm range for Stewart Warner gauges I can see if an aftermarket sender would work. Cheers, Steve

I'm still looking for the following: Air cleaner for Stromberg S1. Interior door garnish mouldings for front doors. Hub caps - any leads on where to get them? And also a fuel pick up and sender - I emailed KM Lifestyle twice but haven't had a response. Any other leads? Thanks, Steve

Thanks Rex, The picture below is the radiator shell with a central hole, the two wider protruding holes are for the cowls stay bars. Not sure the one you found is going to work. Cheers, Steve

Stewart Warner - thanks I'll give them a go.

I've got wire wheels, about 5 3/4" dia centre. I think that they should be like the four in the picture, I need five as one for the side mount spare.

Thanks to Studerex I now have the hood hinge 😊, but need the front support bracket similar to Starlightcoupe's post above although mine would be part No.170898. Just the following to find now: Air cleaner for Stromberg S1. Interior door mouldings for front doors. Hub caps - an leads on where to get them? And also a fuel pick up and sender.

Sorry, been a little busy recently. That looks perfect, the bonnet is 36" so a little extra on to the radiator and cowl would be idel. Drop me a PM with the cost and postage to UK please. Thanks, Steve

SC38DLS - don't give up - I did this to my Buick front wing trying to stop 2 tonnes of car on wet grass (😱) and it came out okay. Yes it will take a bit of work but definitely worth it!

Hi All, I'm not having much luck finding these parts - anyone got any leads? For the hood hinge can someone who has a 1932 Model 55 measure it for me? Length, width and height at the front end and rear end? Thanks in advance, Steve

Nothing wrong with the one in the picture but I don't own one, I got the picture off one of the threads on here. I also need the rear cover.

Some pictures as below.

Robert - I'm based in Northampton, England. Docwiese - were you talking to me or Robert?

Hi All, Any leads on any of the above appreciated. Thanks, Steve