[1920s 1930s Split Rim Tool]

SOLD!

[1936 Ford Radio Complete.]

SOLD!

[1935 1936 Ford Radio]

SOLD!

[Complete Original 1936 Ford Radio]

This radio has been sold!

[1935 1936 1937 1938 Buick Remanufactured Fuel Pump]

Still available

[Complete Original 1936 Ford Radio]

Check out the pictures, Everything is there to mount including mounting bolts for the firewall. My dad had this for his 36 which he sold 30 years ago. Been in dry storage ever since. Was operational but has not been powered up. Has original speaker, excellent radio head and required cables. I have a second radio (cabinet only) and a head in poor condition for spares that can be purchased for extra if interested. $600 US plus shipping cost for pictured radio. Add an extra $100 for the parts radio to ship with.

[1969 1970 Dodge Plymouth Oil Filter Adaptor 340 Cu In]

An original cast iron oil filter adaptor for Dodge Plymouth 340 engines (can be used on later design 318). This is cast iron and not the aftermarket aluminum one. An original part in excellent condition. Even has the original special bolt that is not stretched or damaged. A required part for 100 point restorations. $75 US plus postal cost.

[1910s 1920s Stone Rim Clamps]

For sale three Stone rim clamps (see pictures) These are in very nice condition. Stone is stamped into the surface as well as number 46 and letter "C". $25 US plus cost to mail.

[1910s 1920s Motor Wheel Rim Clamps]

I have three of these vintage Motor Wheel rim clamps. Not cracked overly worn or pitted. $25 US plus cost to mail them.

[Schwarze Electric Co. Model 10 6 Volt Motor Horn 1920s?]

A good working Schwarze Model 10, 6 volt, electric horn Yes it is an aaaaoooooghhhaa type. See pictures attached. $100 US plus shipping cost dependent on destination.

[Front hub conversion]

Optionally there were available steel disk Michelin wheels for DOdge that had five bolt mount. Your rear end is probably that. Do you have woodm wheels on the front? If so you need to first confirm you have the Michelin hubs on the back and then find a set of Michelin fron bubd. Also you will need to find Michelin wheels which may be harder then finding the wood wheels and hubs for the rear.

[e brake linkage, S cABLE, rear b drum]

Use the message function of this site to keep info between you and I or email me at Automotivewoodbodies@gmail.com.

[e brake linkage, S cABLE, rear b drum]

Sent you a message.

[e brake linkage, S cABLE, rear b drum]

I have good original door window winder handles for $30 US each. They all need replating but are not cracked or fractured and knobs are free. Re-reading your post do you need the smaller handle for the windshield riser? I have to check as I think I have an extra and it would be $40 US. Also by back window do you mean the "T" shaped handle for the rear quarter windows?

[e brake linkage, S cABLE, rear b drum]

Here is the air cleaner I have to offer. It is a spare for my own car. Good vanes not cracked or bent. Minimal rust. There are some dents that need work and a little straightening at the end that mounts to carb. About as good as you will find as these are rare to find in any condition. $200 US for cleaner including postage to US and Canada.

[e brake linkage, S cABLE, rear b drum]

New brake drums are available from the Filling Station and others. Hard to find a good used drum. I doubt anyone would ship original plate glass (probably wouldn't survive) so best to get new safety glass cut. Window cranks? do you mean the mechanism or just handles? I do have an original air cleaner for the carb. Best to message me as I don't check here regularily

[1931 devaux 6-75 custom coupe]

I would check with the Durant Club members as I believe they support DeVaux.

[1935 1936 1937 1938 Buick Remanufactured Fuel Pump]

I have a remanufactured fuel pump. Fits late 1935 Series 40, 1936 and 1937 Series 40 and early 1938 Series 40. AC part number 1521812 is stamped on flange which crosses to Ac replacement number 421. Also fits 1935-36 Chevrolet. Box was marked incorrectly for 1929-33 Chev which is why I bought it. Got home found out it isn't right for me so figured I would pass it along. $60 US plus shipping.

[1929 68A Cabriolet]

So I am looking for some good detail pictures of the early top for a 68A Cabriolet. The early version had solid pieces over the doors They are missing from mine and I would like to find good photos so I can fabricate. If by chance someone has one or a pair to sell that would be great. Also any of the early hardware for it.

[wood wheel hub]

Still looking. Anyone got a stash of wood spoke wheels?

[1929 Chevrolet Sedan rear floor pan WANTED]

Looking for a good rear floor pan for a 1929 Chevrolet Sedan. Only the floor from the Sedan (four door) will fit. The Imperial four door bodies are different.

[For Sale Chevrolet Backing Plates And Axle]

1928 1929 Chevrolet. Pontiac in 1928 also used same axle.

[Hudson Kaiser Nash Frazer Olds Pontiac Pedal Pads]

I have a pair of Anchor brand pedal pads new in the box for the following cars: Pontiac 1932-53, Oldsmobile 1934-39, Buick (see Buick ads), Hudson 1948-53, Nash 1938-53, Kaiser 1949-52 and Frazer 1949-51. $25 US plus cost to ship.

[Buick Pedal Pads 1937 to 1952]

I have new in box Anchor brand pedal pads for Buicks (except dynaflow) 1937-39 Models 40 60, 1940 Models 40 50 60 70 and 1941-52 all models. $25 US plus cost to mail.

[1929 Chevrolet Sedan Rear seat panel]

I thought I would throw it out here as well. Never know as not every Chev owner is on VCCA site. Looking for a good rear seat panel for my 1929 4 door Sedan. I have the original but it is pretty sad. I can make one but if I find a good original it would save me the trouble. Its the panel that nails to the wood subfloor and the rear seat bottom sits on top of it. See attached pictures.

Regards