Jump to content

sebastienbuick

Members
 View Profile  See their activity

  • Posts

    3,650

  • Joined

  • Last visited

  • Days Won

    13

 Content Type 

Everything posted by sebastienbuick

  1. sebastienbuick
    sorry the pictures are not in the right order
  2. sebastienbuick
  3. sebastienbuick
    Good evening, here is the advanced work yesterday and this morning. I cut the metal sheets, then repeat, sand, that kills the rust, and paint and primer phosphating. it gave me same when praying some time . and next weekend I weld the metal sheets and Phosphate and primer
  4. sebastienbuick
    Hello, ok thank you for this information;). keep up the good work
  5. sebastienbuick
    you weld with what? I am forced to point to point and grind (up everything to be welded)
  6. sebastienbuick
    hello, beautiful buick and very good work;). I also am in full restoration of my buick electra 225 1969 and I have the same rear trunk that your and also the same problem of rust in the trunk at the checkout stand
  7. sebastienbuick
    hello, yes I have changed this part. the lateral strips on the body are referred or stuck? thank you
  8. sebastienbuick
    hello, so here is news of today's proceedings. This morning I finally managed to dismantle the wing (almost 20 screws) and then I had a surprise. was the time the first owner had double hide a key inside the wing! then I sanded the entire interior of the wing and the bottom of the wing (side road) .I start scoring round rust holes and can be seen with the markings I made there had already been repaired. and next weekend I started to cut the metal sheets to replace and move the phosphating paint and the white primary. So here today (its made me pray when same all day :))
  9. sebastienbuick
    yes it's true thank you;). tomorrow I will put more photos of the work on the wing
  10. sebastienbuick
    hello, here is the result of work . after having sanded the hood, I spend a hinge Phosphate (green) and after a white primer while waiting to pass the black finish. so I start to disassemble the left front fender and I realized that we must first remove the front bumper so I remove the bumper and tomorrow (normally all day) I disassembled the wing and I start preparing
  11. sebastienbuick
    hello, thank you buicknutty! . mine slows but not like when it's new, so I brake hard there is a BRAKE foyant which turns red and the car turns right (a little). My master cylinder is new and the rear wheel cylinder with garnish
  12. sebastienbuick
    very nice rally, there were buick electra 225 1969?
  13. sebastienbuick
    thank you scarredknightfan !
  14. sebastienbuick
    since there are not too pleased this afternoon, I stink finish sanding the hood and I go from rust transparant. next step phosphating paint and primer
  15. sebastienbuick
    Hello, ok thank you very much for all this information;). electra is my original caramel color and the edge of the inside cover there is caramel paint. so I think it's like your 69 gs. So my hood and black satin original thank you for the information on the brakes). I'll send them a message . yes indeed they are caliper pistons 4, I'll see later;). if not it rains this afternoon I will continue my hood sand and paint the primary. I will put pictures
  16. sebastienbuick
    thank you . could someone tell me what color is inside the bonnet? (Black or color bodywork). thank you to all of you
  17. sebastienbuick
    hello, is that it is indeed the foam cover for electra? thank you
  18. sebastienbuick
    hello and thank you , I inquire and was told that there was no remanufactured for discs and pads (to the front). and someone told me that GM had probably done a restoration kit to mount either same. is it true ? on the internet I found a California dashboard in good condition (mine was cut to the radio). I also find on the internet that this foam put in the hood, there's a hole in the middle and I wonder why? was there a light at that location? I'll put the links if I can http://www.rubbertherightway.com/1969-buick-restoration-parts-hood-53147-prd1.htm thank you !
  19. sebastienbuick
    hello, here are some pictures of the early restoration of my buick (starting in September 2015). I board not remove the chassis because I had no place, so I try to do the same thing but with the chassis set. everything was a sand sheet metal then after I put a primer phosphating and white primary for the bottom I did the same thing but in addition there is a rust black paint and a UNDERBODIES (blaxon) .I do deu into two parts with the front and back because I did not asser place too . I made piece by piece (inside the box, with underbody frame, chest, right side doors, doors left sides, now the hood that I have to finish), and after I continued by the front wings, wheel, brake .... and I want to know if I can find a restoration kit for front brake? thank you
  20. sebastienbuick
  21. sebastienbuick
  22. sebastienbuick
  23. sebastienbuick
  24. sebastienbuick
  25. sebastienbuick
×
×
  • Create New...