aunty norm

I am thinking about rebuilding my Senior motor but there is a prolbem !!!! The rear oil seal mount. Has any one have a spare, or known of anyboby reproducing them at a reasonable cost?

How much for the rear tail lights? what condition are they in? Terry auntynorm.snake@gmail.com

After some tail lights or stands and license plate light to suit a 1937 dodge sedan Terry auntynorm.snake@gmail.com

Want to buy some tail lights or stands to suit a 1937 Dodge sedan also a license plate light Terry auntynorm.snake@gmail.com

Looking to buy some tail light stands and lights to suit a 1937 dodge sedan plus a license plate light. Terry auntauntynorm.snake@gmail.com

Do you still have the carby ? What type is it ? Can you send me a photo? auntynorm.snake@gmail.com thanks Terry

I require a full set(8no.) of external brake return springs, plus door latch to suit a finer 70 1927 Roadster. Will pay a reasonable price plus shipping. thanks Terry

Nice car ! I wish my car was near that finished! But I was wondering if you had any spare door hinges that you could spare? Terry auntynorm.snake@gmail.com

I now have the radiator repaired!!!! Many THANKS to Bob!!!! He did a unbeliveable job. Also thanks to those who tried to help.

I have a 1926/27 finer 70 but I missing the fedco plate. Does any one have one? Or is there reproductions I think the numbers range is from PP-930-s to SP-361-s ? Also is there any chassis number and were is located Any help would be great!

thanks for input ! but my motor number is S22615 which is a early motor. It has a 3 1/4" bore not the 3 3/8" so there might be differance there?

Looking at re-setting my distributor advance curves ,but I have only info for type 10846 but I need info on type 10836. Type 10846 being for Victory six,an 10836 for Senior Six Do they used the same settings or are they different??? Has anyone tried interchange these unit. I have heard they are different, but what degree I don't know. If anyone has any info on the Senior unit 10836 can you past it on to me please.

The car was built in Australia in 1927, plus the car number was IS21462. The radiator is a fin and tubes type( McCord?) When they tried to fit a new core to the radiator they totally destroy the top tank and dumped all the bits in the scrap bin. I have no idea what the top tank and baffles look like. If I did, I may be able to find someone to reproduce it for a price plus shipping. I tried to attached a few photos but no good! So I must rely on the good hearted Dodge people to help me!

Trying to complete my 1928 Senior, Had radiator rebuilt by a ******* so called radiator rebuilder. He totally stuff it!!!!! Now I need to find a replacement! So if any one can help me get one so as I can drive my car again it, would be a great help!! you can email me on : Terry auntynorm.snake@gmail.com PLEASE HELP ME OUT!

Started new project but need wood plans as the car was in bits. Pictures or plans would be a great help! Terry

The shaft on the the steering box has been machined to match. Do you have a spare pitman arm that you might be willing to part with at a price? I would pay all postage! ps. the steering box shaft would help as well! Terry

Thanks for your reply the photo looks the same as the pitman arm I have. So some one must have altered my arm so as to be able to use it again . The question to be asked IS IT SAFE TO USE? Terry

Trying to replace or repair pitman arm on my 1927 Senior Dodge. I removed the arm and was surprised it had a straight taper shaft with key way. It did not have a taper spline shaft as on other models. IS THIS CORRECT?????? or has it been altered???? Can any one let me know or were I can find one!!!! Terry auntynorm.snake@gmail.com

have you been able to find a some of the orginal mat ? If not, could you please send photo of your mat. I am at the stage of fitting the running boards and need to obtain matting to suit! my email address auntynorm.snake@gmail.com THANKS Terry

THANKS! That would be great as I have no idea what the orginal looked like! Terry

Does anybody have a picture of the running board mat for a 1927/28 senior dodge???? If so could you send it to me auntynorm.snake@gmail.com

I have just removed the carby and I am doing what you suggested! I will let you know how it goes! Thanks for the reply

In am trying to fit a Carter BB-1 Updraft carby to my Senior Six . But I am having trouble adjusting the idle screw, it will not idle at all, unless the the screw is fully in. Can any one help me with jet sizes or any suggestion THANKS Terry