MAG473
-
Posts
240 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by MAG473
-
-
Anyone buy the Metz car (s) on eBay in Shingle Springs CA? I would like to hear from you. 507 two six nine 6696. Wayne
-
-
Is there any interchange in parts between model 22 and 25? fenders?
-
I'm going to Reno NV from Southern MN to get a car and parts first week in March. Any one need parts moved out to the Reno area??
Pickup and trailer.
-
Brushguy, will you be at Chickasha again this year?
-
Thank you. I'll follow up when I get the springs.
ThLuv2wrench,
What it the measurement from top to bottom at the point where the bolt is located to hold the leaf springs together. I located a company in Ohio that makes these springs. Need to give them the dimensions to determine how much of an arc is required. Thanks in advance.
-
-
The height measurements are what I'm looking for. My description was not clear. The height measurement at the center of the arc is what the shop needs to build the new springs. Thanks
- 1
-
-
Luv2wrench,
What it the measurement from top to bottom at the point where the bolt is located to hold the leaf springs together. I located a company in Ohio that makes these springs. Need to give them the dimensions to determine how much of an arc is required. Thanks in advance.
- 1
-
Jeff,
Are the front springs 30" and rear springs 36" ?
Wayne
-
Are the cars in the spectator parking areas allowed to stay there overnight?
-
You are correct sir. Since I wasn't having any luck with my ad for a Metz radiator, I thought I'd take a chance that someone had an unidentified radiator that was from a Metz 22.
-
-
Metz models
in Metz
Congrats on your new purchase. The car looks to be complete, which is better than the pile of parts many of us started with. I have most all of the parts with the exception of the radiator.
Wayne
-
Jerry, I've been looking for a used radiator for quite awhile. I'm sure there are a few in someone's cache of parts, but more than likely they don't know what they fit. I've been in contact with Brassworks (CA) to make a new one but it will be costly. How bad is your radiator?
Wayne
-
Jeff, where did you locate the new leaf springs?
-
Wanted : early style (1913) Metz Radiator. Any condition.
-
Where are these cars located?
-
Wanted Metz 22 radiator, First series with angled top tank.
-
Wanted: 1925 Dodge Touring rear doors and/or hinges.
-
I have a tank like the one in the photo. Solid original tank has been stored inside. measures just over 36" long, 12" x 8" oval at end of tank. I sent an email.
Wayne. Minnesota
-
Does anyone have a diagram or photo of the emergency brake assembly on a late 40's Dodge truck. This is a 2 1/2 ton, but may be same set up as pickup only larger scale. Need to know how all the bolts and springs attach for the band. Thanks
-
I have a 1925 Dodge Brothers touring car that needs rear doors including hinges. Also all four door opening mechanisms (handle activated). Any seats?
Metz cars sold on ebay in CA
in General Discussion
Posted
Thanks for the responses. I've contacted the seller and gave my information to pass along to the buyer (s).