-
Posts
2,141 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by broker-len
-
-
never heard of that will check it out would like to just find two of them
-
3 INCHES LONG 9/6 18 HOLDS THE FRONT OF THE LEAF SPRING ------- GREASE HOLE IN CENTER----- HAVE THEM BUT ARE ABIT WORN PLEASE CONTACT AT BOBNROMAN@YAHOO.COM
-
TAKE A LOOK AT PICTURE ---DOES ANY ONE KNOW WHAT THESE ARE PLEASE CONTACT AT BOBNROMAN@YAHOO.COM
-
Many mopars use these moldings ----bolt under door and runn from fender to fender --reproed from alluminum please contact at----- bobnroman@yahoo.com
-
-
-
if you mean a PA ---- never find ,,,,,,,, if you mean a PB there is one on E Bay
-
On 31 plymouth and other mopars there is a moulding that is under the door from fender to fender SIDE SILL MOLDING ----------I have a few sets left can send pictures please contact at bobnroman@yahoo.com
-
I have , what I think is the exact pattern for 37 rubber matts can send pictures and samples please contact at bobnroman@yahoo.com
-
thank you for the advice I will keep it in mind----------------BR
-
Have part of a rear motor mount the part that bolts to trans also the front motor support----- see picture ---- please contact at bobnroman@yahoo.com
-
Can some one help me ? looking for front bolt attaching leaf spring on 32 plymouth 3 1/2 X 1/2 has the grease hold in middle -- need two ---- the ones I have are usable but worn,,,,,,,,, please contact at,,,,,,,,,,, bobnroman@yahoo.com
-
Please help me clean my garage take a look make a offer please contact at bobnroman@yahoo.com most is mopar
-
SEE PICTURE HAVE BEEN TOLD THESE ARE FOR MID 30S BUICK i AM NOT SHURE have 7 of them THREE INCHES LONG AND SEEM TO TAKE A 3/8 VALVE SHAFT----Mc Quay-Norris G-282 Please contact at bobnroman@yahoo.com
-
I bought these for my PA that model used both the pin and split ring keeper mine has pin so had to buy other valves the PA valves,,,, intake and exhause are differant the PB are the same and has split ring I have enough for a compleat set for eather PA or PB contact at bobnroman@yahoo.com
-
HAVE HALF OF A REAR MOTOR MOUNT the part that bolts on trans please contact at bobnroman@yahoo.com
-
HAVE NEW OLD STOCK 4 CYLINDER VALVES PA,,PB---- THESE HAVE THE SPLIT RING KEEPER SET UP PLEASE CONTACT AT BOBNROMAN@YAHOO.COM
-
Can some one help ? Box says MCQUAY-NORRIS -----G-282-----3 inches long seems to take a 3/8 valve stem have 7 of them please contact at bobnroman@yahoo.com
-
the last picture on the thread is close to what the missing part looks like the baral that says fuse on the end
-
I have a post for a very hard part from the suspention in my 32 PA Plymouth one of the AACA members helped me out and I just want to bring him to every one's attention Dan Boehm New Boston Mi. 734 753 3979 "Daniel Boehm" <antiquevehicle@charter.net>
Restoration,,repair Transport give him a call--------------BR
-
can supply reprints of 31-36 PLYMOUTH MECHANIC REPAIR MANUAL ABOUT 60 PAGES CAN SEND MORE INFO AND PICTURES PLEASE CONTACT AT BOBNROMAN@YAHOO.COM
-
can supply good quality rubber for boards and front floor can send pictures and samples please contact at bobnroman@yahoo.com
-
I have a coffie can with 5 or 6 of them last time I saw it was 15 years ago I WANDER WERE THEY ARE BOBNROMAN@YAHOO.COM
-
Can supply running board rubber early 30s can send pictures and samples please contact bobnroman@yahoo.com
ID Distributor
in General Discussion
Posted
Please help me the tag has PRETOLITE 1GW-4501 2Y---what does it fit ? please contact at bobnroman@yahoo.com