Mutt's37Buick

Thanks very much for your help

Thanks for the advice, I just put the question out on the Buick site as well.

Removing water temperature sensor from 1937 Buick Straight 8<!-- google_ad_section_end --> <!-- google_ad_section_start -->I'm just starting a frame off restoration on my 1937 Buick Roadmaster (320 cu inch straight 8) and have been working to dissassemble the dash & interior before bodywork and paint. I have the instuments cluster removed, except have not been able to pull the water temp sensor out of the engine block. The nut on the engine was easy to remove, but the sensor appears to have seals on it and I have not been able to pull it out with needle nose pliers. 1) Is it correct that sensor should pull straight out? 2) Can anyone give me tips on how to remove it without damaging the sensor? 3) Does anyone know what the seals are made of and is there something I could use to disolve them? Thanks<!-- google_ad_section_end -->

I'm just starting a frame off restoration on my 1937 Buick Roadmaster (320 cu inch straight 8) and have been working to dissassemble the dash & interior before bodywork and paint. I have the instuments cluster removed, except have not been able to pull the water temp sensor out of the engine block. The nut on the engine was easy to remove, but the sensor appears to have seals on it and I have not been able to pull it out with needle nose pliers. 1) Is it correct that sensor should pull straight out? 2) Can anyone give me tips on how to remove it without damaging the sensor? Thanks

1937 Buick engine and 3spd transmission for sale 40K original miles, but has not been started for many years 320 cubic inch straight eight from '37 Roadmaster 3 speed transmission floor shift Asking $900, OR BEST OFFER Sorry for the dusty condition of the engine. Washed exterior, but not engine. The engine and transmission are compete with all accessories & still in the car. I have an engine lift and will discount heavily if you want to help me pull Call Gene at 303-907-1955 (leave message if I don't answer and I'll get back to you right away) <!-- google_ad_section_end -->

Car was last licensed in '52. I'm in Westminster, CO. I just added it to my bio as well. Thanks for your interest.

The angle of the shot does not show it, but the spare wheel well is still there. I took the spare wheels off when we moved the car because they were not bolted down. Here is a shot in the garage where it was stored with the wheel in place. Any interest in the engine & tranny? Mutt

1937 Buick engine and 3spd transmission for sale 40K original miles, but has not been started for many years 320 cubic inch straight eight from '37 Roadmaster 3speed transmission floor shift Asking $900, OR BEST OFFER Sorry for the dusty condition of the engine. Washed exterior, but not engine. The engine and transmission are compete with all accessories & still in the car. I have an engine lift and will discount heavily if you want to help me pull Call Gene at 303-907-1955 (leave message if I don't answer and I'll get back to you right away) <!-- START CLTAGS -->