mlavin73

Looking for $8500.00 or best reasonable offer for the whole lot. If the whole lot doesn’t sell I will bring some to Hershey. Not all will fit in my truck so if there is anything you may be interested in, PM me and I will try to get it on the truck to Hershey. Will post my location there prior to heading out. Thanks.

Hope these pictures help. I'm including a picture of the whole fender as well just to confirm I have the correct one.

Sure you can stop by on the 30th or 1st hogbakken. Are you looking for indivual parts or the whole lot? Let me know. I'm located in Layton, NJ

I'm pretty sure I have one left. I will try to check tomorrow and get a picture.

Sorry packard32. I thought I responded this morning. Just tried again. Let me know if you get it.

No problem restorer32. Good luck in your search for the bumper. I had one other set that sold already and that went to a 32. If you need anything else please let me know. West I have 4 19 inch Packard wire wheels left....and 2 other that we're not sure what they go to because they have a larger hub opening. Of the 4 here is their descriptions, hopefully the pictures describe the issues: -2 of them, someone elongated the valve stem openings - my father in law could fix these. -1 has a piece missing along the edge - I think my father in law said this should be sold as a parts wheel. Don't recall if he said he could fix it -1 appears to be ok. I do have trim rings for all these. How would you be looking for the rims? As-Is or repaired? Let me know and I will talk to my father in law. Had you seen my post last Oct / Nov I had more rims without any issues. I also had a real nice set of 6 mounted with tires, but those went almost as soon as I got them.

West I have 1 disc and a few spoke. Which are you looking for? I'll PM you with a price after I speak with my father in law.

Ok here is what it looks like to me restorer32. All my bumpers appear to be 4 1/8th inch wide. Then the measurements from center of the eye to center of the eye is: 66 3/4th - have 2 of these 61 1/2 - have 2 of these 65 1/2 - have 1 of these The measurements I have provided appear to be correct. I was out in the rain working by myself. If there is a slight discrepency with the measurement let me know and I will double check. Let me know if any of these are right and I will work with my father in law on a price. Here are some pictures as well...not the best as the weather is not great here. Thanks. Mike

I will try to get that information to you today restorer32.

Just sent you an e-mail dayz

Have a ton of Packard Parts I am looking to get rid of prior to Hershey. I have more than I could easily bring out in a trip. I don’t have an accurate inventory of what I have (some years / models are unknown). We know the bulk of my parts were from 28-32 (some were older, some were newer) Here is an idea of some of the things : 2 Shutters, Radio, 4 drums - Real nice condition, 1 Set of Sidemount Arms, Luggage Rack (29-31), Luggage Rack Arms, 1 Set Luggage Rack Rails, Side Mount Tire Cover, 2 Sidemount hub covers, 2 Lightbars, 1 Bijur Pump or Tank,<O:p</O:p Some bumpers, Stone Guards for 31 and one for a 32, Trunk Lid, 1 Disk wheel and trim ring, 3 sets of hoods, 4 19 inch Packard Wire Wheels and rings, 2 19 inch Wire Wheels and rings (not sure what they go to), 4 Rear Doors (believe most of the guts are still present aswell as trim panel), 1 Front Door, Steering Column with wheel, Steering Wheel, Horn, Toolbox, Air Cleaner, Distributor Caps, Radiator Inlet Covers, Parking Brake Handle Parts, Headlamps (Probably 4 or 5 sets), Gas Tank Cover, 2 Tail light trim bezels, Jack Parts, Fan Blade<O:p</O:p Running Board Moldings, 13 Various Fenders - 1 is def a NOS (still has the paper), 2 others are tagged NOS but may be early take offs <O:p</O:p A video walkthrough can be seen at . The only thing that has been sold since the time this video was taken was the 2 tires. I’m hoping to have someone within driving distance of Northwest NJ purchase because I cannot ship this. Make me an offer on some or all.

Have a ton of Packard Parts I am looking to get rid of prior to Hershey. I have more than I could easily bring out in a trip. I don’t have an accurate inventory of what I have (some years / models are unknown). We know the bulk of my parts were from 28-32 (some were older, some were newer) Here is an idea of some of the things : 2 Shutters, Radio, 4 drums - Real nice condition, 1 Set of Sidemount Arms, Luggage Rack (29-31), Luggage Rack Arms, 1 Set Luggage Rack Rails, Side Mount Tire Cover, 2 Sidemount hub covers, 2 Lightbars, 1 Bijur Pump or Tank,<O:p</O:p Some bumpers, Stone Guards for 31 and one for a 32, Trunk Lid, 1 Disk wheel and trim ring, 3 sets of hoods, 4 19 inch Packard Wire Wheels and rings, 2 19 inch Wire Wheels and rings (not sure what they go to), 4 Rear Doors (believe most of the guts are still present aswell as trim panel), 1 Front Door, Steering Column with wheel, Steering Wheel, Horn, Toolbox, Air Cleaner, Distributor Caps, Radiator Inlet Covers, Parking Brake Handle Parts, Headlamps (Probably 4 or 5 sets), Gas Tank Cover, 2 Tail light trim bezels, Jack Parts, Fan Blade<O:p</O:p Running Board Moldings, 13 Various Fenders - 1 is def a NOS (still has the paper), 2 others are tagged NOS but may be early take offs <O:p</O:p A video walkthrough can be seen at . The only thing that has been sold since the time this video was taken was the 2 tires. I’m hoping to have someone within driving distance of Northwest NJ purchase because I cannot ship this. Make me an offer on some or all.

I appreciate the info Todd. I'll keep that in mind in case someone else asks about these doors. Thanks, Mike

I just ran out and double checked. I have 2 SETS of rear doors, but only 1 front door. The front door I have is not nearly as complete as the 2 rears I sent you a picture of. Sorry I couldn't help.

I know for sure I have 2 sets of rear doors. I believe I have 1 set of front doors. If memory serves me right I have 6 doors total. Not sure if it has the squared corners. Will have to check that one. Wouldn't it be an issue with hinge placement? I believe your dimensions on the hinges did not match my door.

It's funny, my father in law just left and said the same thing as you about the more squared corners etc. We did find another set of the doors in my shed (not as complete as the two I posted pictures of). They are the same exact ones as the ones in the picture and they are tagged 32-33. Sorry I didn't notice that earlier. Sorry I couldn't help you out.

I just went out and took some pictures for you. Some of the measurements match up in my opinion.....others don't. My father in law (who is my expert on this stuff) will double check for me and I will respond back. Here is what I get: Window opening width - matches at 26 3/4 Window Opening Height - matches at 14 1/2 Top of door width - matches at 32 Overall Height - looks to me to be 45 1/2 Bottom width - looks to be 17 3/8 Top of door to center of top hinge - matches 1 1/4 Top of door to center of middle hinge - looks like 17 3/4 Top of door to center of bottom hinge - looks like 26 5/8 Overall height hinge side - I show 28 1/4 The one door has a dent which you can see in the one picture. There are no outside handles on the door. I will have to look around and see if I have those or if they were sold already. I will respond back later with confirmations on the measurements as well as a price. Let me know if there is anything else you are looking for. I'm trying to get a buyer on the whole lot because it looks like work is going to keep me from going to Hershey.

I just printed this out and will have my father in law come up and go over this with me. We'll check dimensions and send you some detailed pics. I'll try my best to get this done today for you. Are you going to Hershey?

I have some rear doors. Not sure if they are for your model / year. I'm in NJ but I could get them out to Hershey if you plan on attending. Not sure if you could tell from my remaining parts video . If you need pictures I could probably get some for you over the weekend.

Did you see this? Packard Motor Car Information - 4 parts cars in Conn. [Packard Forums - For Sale, Wanted, Trade] Not sure if these cars have the parts you need.

Hi Al, I sent the pictures to your e-mail address for Doug. You should have them by now. Any issues just give him a call.

I have a nice set of drums and also a radiator. The rest of the parts you are lokoing for I have already sold. I will send you a PM. Thanks. Mike

I checked with my father in law and he said he doesn't have any. He said these are pretty hard to come by. Good luck in your search.

Franklin Clocks - $300.00 each Oakes Locks - $300.00 each (I can also repair broken ones) Floorboard Washers - $5.00 each (2) Tires – Custom Classic 6 Ply Rating 6.50 X 19. Original from 20-30 years ago. NOS. Still soft and plyable - $250.00 each Several 30-33 19 inch wire wheels with trim rings - $175.00 each Any questions please call Doug Hull from Hullco Antique Auto Restorations at 201-230-3300.

Todd, I sent you an e-mail. Thanks, Mike