mlavin73

Well unfortunately I didn’t sell everything fromHershey. The parts I brought home can beseen in the video here . Some of the things I still have are:<o:p> </o:p> 3 hoods (believed to be 32 902’s) 3 doors with some of the metal trim and regulators present(not sure of year / model) 1 Oakes lock with key A nice set of 4 brake drums An air cleaner Some bumpers Chrome hub Distributor (may not be Packard according to people whostopped by my spot) 3 rear fenders (not sure of the year. Believe 1 to be late 30’s and the other 2early 20’s) 1 front fender (someone stopped by and said it may not bePackard due to no battery box) There are more smaller items that can be seen from the video. Anyway I’m looking for room in the shed so I would like tosell it all. I will most likely be sticking it up on Ebay tomorrow. I’m located in Layton NJ.

Hello everyone. Loading my truck for the trip out to Hershey on Tuesday. I’m hoping to be there by about noon. I still have a lot of good parts to sell. Most of my parts fell in the 28 – 32 range. Some of the fenders are tagged as earlier 20’s. Looking to unload everything to get room backin my shed. I have a landscapingbusiness and it’s hard fitting all my equipment and parts. I will be located in C3L 17 to 25. Attached is a video of all the parts . Since this video was recorded, a fewthings have sold. Off the top of my headI think it was:<o:p> </o:p> Rumble Seat Lid Lug Nuts Gas Tank Cover Shutters Dome Light <o:p> </o:p> Make me a cash offer and take the whole thing over to yourspots and sell them and keep what you need. I probably won’t be on the internet too much after today because I havea full day of work tomorrow. The bestway to contact me is via mlavin73 at gmail dot com. That goes to my phone so I can respond back. <o:p> </o:p> Thanks, Mike

Not sure which vent you are talking about. I have a video up on online that shows what parts I have left. A good deal of the parts I sold so far have been 32 902 items. You can check it out and see if you see what you are looking for . My father in law is more familiar with what I have. It looks like I have the molding for below the windshield, not sides but I'll have to go in the shed and check. Some of these parts have since sold. Are you going to Hershey? I think my site is C3L-17 but I will double check with my father in law if you want to come by.

Thanks for passing the info along Steve and for helping us identify. The dash piece is owned by my father in laws friend. I don't think he wants to sell it....he was more just trying to find out what it went to. Thanks again. PS. I'm Doug Hulls son in law. He said he was going to contact you after you had identified it but he's been real busy. Probably getting ready for Hershey I'm sure.

Up for sale is a 1953 Studebaker Commander Coupe V-8 Auto. The car has original paint and interior. Solid except for the left front fender. The car is located in NJ. I'm getting it running now. Asking $9000.00. If you need more pictures or higher resolution (these were taken low res so I could upload) pictures please send me a PM. Any questions in regards to the car please call Doug at 201-230-3300. Thanks for looking.

Up for sale is an Original 1930 Reo Mate Coupe. It has a nice original interior. The running boards are currently being done right now. It has 6 wire wheels and 5 hubcaps are done. The car is located in NJ. I'm getting it running now. Asking $15000.00. If you need more pictures or higher resolution (these were taken low res so I could upload) pictures please send me a PM. Any questions in regards to the car please call Doug at 201-230-3300. Thanks for looking.

Up for sale is a 1953 Studebaker Commander Coupe V-8 Auto. The car has original paint and interior. Solid except for the left front fender. The car is located in NJ. I'm getting it running now. Asking $9000.00. If you need more pictures or higher resolution (these were taken low res so I could upload) pictures please send me a PM. Any questions in regards to the car please call Doug at 201-230-3300. Thanks for looking.

Up for sale is an Original 1930 Reo Mate Coupe. It has a nice original interior. The running boards are currently being done right now. It has 6 wire wheels and 5 hubcaps are done. The car is located in NJ. I'm getting it running now. Asking $15000.00. If you need more pictures or higher resolution (these were taken low res so I could upload) pictures please send me a PM. Any questions in regards to the car please call Doug at 201-230-3300. Thanks for looking.

We have a dash assembly we found in a friends garage that we have no idea what it goes to. Hoping someone on here can help us identify it. In case the pictures aren't clear enough, here are some details: Top Left: Oil Pressure Gauge. Marked with Hancock Charlotte Michigan Top Right: Battery Meter. Three positions Off Charge and Discharge Center: Carb Controls Bottom Left: Ignition Switch Off, Neutral, Start Bottom Right: Headlight Control. Off Dim On Sorry the picture is not the best. I believe if you click on the image it will get larger. Having camera challenges tonight. Anyone have any ideas? Thanks! Mike

Well I spent the day throwing up some more parts onEbay. Trying to get some room in theshed for my new project (and money in my wallet to help the new projectalong). Anyway I have the following itemsup on Ebay. <o:p> </o:p> Packard Fender Possibly 26 or 27 – Item Number 221109238274 Packard Fender Possibly 24 or 25 Single 6 Closed Car – Item Number221109240865 Packard Fender Possibly 1928 526 – Item Number 221109258858 Packard Air Cleaner – Item Number 221109263030 Oakes Lock and Key – Item Number 221109263853 Packard Interior Dome Light – Item Number 221109264878 Packard Brake Drums – Item Number 221109266693 NOS Packard Fender 1929 Std 8 626 – Item Number 221109267947<o:p></o:p> <o:p> </o:p> I’m located in Layton NJ if anyonewants to come by and take a look in the shed. I also have this video up however some parts from the video have beensold (i.e. Rumble Seat Lid, Gas Tank Cover, Shutters). <o:p></o:p><o:p> </o:p> If you have any questions please letme know. <o:p></o:p> Thanks,<o:p></o:p> Mike<o:p></o:p>

Just relisted the rest of my Packard Parts on Ebay at a lower price. The link to the auction can be found here Large Lot of Packard Parts - late 20's - early 30's - No reserve / Price reduced | eBay I’m looking to make room in the shed for another lot of parts that I am looking to purchase. This is a no reserve auction. Whoever wins this I can pass along names of people looking at 3 of the parts with an offer of $550.00 (shutters, 1 NOS fender and the rumble seat lid). If I cannot sell it as a whole it will most likely go to Hershey in October. If you see individual parts you may be interested in, e-mail me through the forum with the item and the offered amount and I will save the list to give to the winning bidder. I’m located in Layton NJ if you would like to come by and check it out. Thanks. Mike

Just relisted the rest of my Packard Parts on Ebay at a lower price. The link to the auction can be found here Large Lot of Packard Parts - late 20's - early 30's - No reserve / Price reduced | eBay I’m looking to make room in the shed for another lot of parts that I am looking to purchase. This is a no reserve auction. Whoever wins this I can pass along names of people looking at 3 of the parts with an offer of $550.00 (shutters, 1 NOS fender and the rumble seat lid). If I cannot sell it as a whole it will most likely go to Hershey in October. If you see individual parts you may be interested in, e-mail me through the forum with the item and the offered amount and I will save the list to give to the winning bidder. I’m located in Layton NJ if you would like to come by and check it out. Thanks. Mike

I listed everything back up on Ebay. The auction can be found here eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices . Probably my last attempt to sell before Hershey as I will be heading back to work April. Any questions let me know. Thanks for looking.

I listed everything back up on Ebay. The auction can be found here eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices . Probably my last attempt to sell before Hershey as I will be heading back to work April. Any questions let me know. Thanks for looking.

I listed everything back up on Ebay. The auction can be found here eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices . Probably my last attempt to sell before Hershey as I will be heading back to work April. Any questions let me know. Thanks for looking.

Hi Scalptrader. The stone guards have been sold. I believe someone bought the toolbox as well (I'm in Florida for the next 7 weeks so I'm not home to check). I do still have the radio but I don't think there is a head unit for it. I believe it is just a large box. You could probably see it in the video I have with all the parts remaining. It can be seen here . I'm looking to sell everything as a whole lot now. Thanks!

I have decided to try and sell all my remaining parts through E-bay. Most are late 20’s to early 30’s. I’ve posted some pictures, a video and a breakdown of the parts I have left. If you are interested it can be found here http://www.ebay.com/itm/Large-Lot-Packard-Parts-late-20s-early-30s-No-reserve-Auction-/220907892557?hash=item336f22ef4d&item=220907892557&pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr . If the lot doesn’t sell, I will go back to individual parts after April. If you have any questions let me know. Thanks for looking.

I have decided to try and sell all my remaining parts through E-bay. Most are late 20’s to early 30’s. I’ve posted some pictures, a video and a breakdown of the parts I have left. If you are interested it can be found here http://www.ebay.com/itm/Large-Lot-Packard-Parts-late-20s-early-30s-No-reserve-Auction-/220907892557?hash=item336f22ef4d&item=220907892557&pt=Vintage_Car_Truck_Parts_Accessories&vxp=mtr . If the lot doesn’t sell, I will go back to individual parts after April. If you have any questions let me know. Thanks for looking.

I do have some Packard hoods (3 - all the same) but I'm not sure what year they go to. Maybe you could tell by looking at these pictures. I can get dimensions if you need. Most of my parts were 28-32 but some have been newer and some older.

Figured I would post the link since I know my father in law is going to ask me how I find this thread that they are talking about. http://forums.aaca.org/f170/1930-chrysler-77-a-313257.html

Truck is all loaded and ready to go. I will be located in C3L17 through 25. I don’t have an accurate inventory of what I have (some years / models are unknown). We know the bulk of my parts were from 28-32 (some were older, some were newer) Here is an idea of some of the things : 2 Shutters, Radio, 4 drums - Real nice condition, 1 Set of Sidemount Arms, Luggage Rack (29-31), Luggage Rack Arms, 2 Sidemount hub covers, 2 Lightbars, 1 Bijur Pump or Tank, Some bumpers, Stone Guards for 31 and one for a 32, Trunk Lid, 1 Disk wheel and trim ring, 3 sets of hoods, 4 19 inch Packard Wire Wheels and rings, 2 19 inch Wire Wheels and rings (not sure what they go to), 4 Rear Doors (believe most of the guts are still present aswell as trim panel), 1 Front Door, Steering Column with wheel, Steering Wheel, Horn, Toolbox, Air Cleaner, Distributor Caps, Radiator Inlet Covers, Parking Brake Handle Parts, Headlamps (Probably 4 or 5 sets), Gas Tank Cover, 2 Tail light trim bezels, Jack Parts, Fan Blade, Running Board Moldings, 13 Various Fenders - 1 is def a NOS (still has the paper), 2 others are tagged NOS but may be early take offs <O:p</O:p A video walkthrough can be seen at .I will be out there Tuesday afternoon and will be there until Friday pm.

My location at Hershey will be C3L17 through 25. I will be out there Tuesday afternoon and will stay until Friday pm. I will be loading up whatever I can fit into the truck Monday afternoon. If anyone is coming through the Northwest NJ area and wants to see / buy any or all of the items prior to getting out to Hershey I can make arrangements. Thanks….see you there.

My location at Hershey will be C3L17 through 25. I will be out there Tuesday afternoon and will stay until Friday pm. I will be loading up whatever I can fit into the truck Monday afternoon. If anyone is coming through the Northwest NJ area and wants to see / buy any or all of the items prior to getting out to Hershey I can make arrangements. Thanks….see you there.

Hogbakken. I haven't heard from you since asking for my address via e-mail. Are you still planning on coming? I'm stopping work early that day so I need to know. Please call to confirm at the number I sent you. Thanks.

Looking for $8500.00 or best reasonable offer for the whole lot. If the whole lot doesn’t sell I will bring some to Hershey. Not all will fit in my truck so if there is anything you may be interested in, PM me and I will try to get it on the truck to Hershey. Will post my location there prior to heading out. Thanks.