30sclassics Posted February 9, 2018 Share Posted February 9, 2018 I need to replace the king pins on my (unknown and incorrect) front axle. The pins are 7½” long, between .92” and .93” diameter, have Timken T95 thrust bearings, have a retaining pin, and bushings are 1-1/16” diameter x 1¼” long. Can anyone identify these so I can get new ones? Thanks in advance! Link to comment Share on other sites More sharing options...
Mark Wetherbee Posted February 9, 2018 Share Posted February 9, 2018 I can’t help with the ID, but being straight pins you might be able to find a machine shop that could run them through a centerless grinder taking only as much material off to clean the pins and then have custom bushings made from a good quality bronze. Link to comment Share on other sites More sharing options...
30sclassics Posted February 9, 2018 Author Share Posted February 9, 2018 Mark, thanks for that advice. I may try that if I cannot find a set. Link to comment Share on other sites More sharing options...
mribbich@wi.rr.com Posted February 12, 2018 Share Posted February 12, 2018 Try posting pictures of the axle; it may be easier to ID. Marv. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now