rustyderby Posted July 30, 2013 Share Posted July 30, 2013 Have any of you found a few good sources for the teens four cylinder engines? Mainly gaskets and valves. Mine is in a 1914 Saxon. Any leads will be appreciated. Thank you ,Gary ,Ohio Link to comment Share on other sites More sharing options...
Bud Tierney Posted July 30, 2013 Share Posted July 30, 2013 Generally speaking, many say the place to start for obsolete Cont'l parts/advice/sympathy is Garrad (Jerry/Gerry) Moon at Montes Eqpmt in Chicago, obsolete Cont'l dealersgarradmoon@montes@flash.net or montesequipment.comP A Ross Machinery in Dallas has been mentioned as helpful with old Cont'ls--parossmachinery.comAll that being said, two sources for NLA gaskets are olsonsgaskets.com, Port Orchard, WA, very highly spoken of, and gasketstogo.com, a sponsor on the smokstak old engine site.Valves I have no particular source for, but they are usually easily fabbed out of blanks; a number of places advertise this service, with at least one a sponsor on the smokstak site I can't recall (click on sponsors at the top of the smokstak page and scroll down thru the sponsors cards)...HTH Link to comment Share on other sites More sharing options...
rustyderby Posted July 30, 2013 Author Share Posted July 30, 2013 Thank you ! I will follow up on these leads today. Regards,Gary/Ohio Link to comment Share on other sites More sharing options...
c49er Posted August 10, 2013 Share Posted August 10, 2013 Olsens Gaskets... Port, Orchard Washington. Very good company to deal with on all the hard to find gaskets. They can help on valves too. Link to comment Share on other sites More sharing options...
rustyderby Posted August 10, 2013 Author Share Posted August 10, 2013 THANK YOU FOR YOUR REPLY. ALL GASKETS AND VALVES HAVE NOW BEEN LOCATED .NEEDING THE ATWATER KENT BITS AND THE CONTINENTALS RIGHT ANGLE DRIVE FOR THE DISTRIBUTOR THAT RUNS OFF THE REAR OF THE CAMSHAFT. ANY LEADS THERE? GARY/OHIO Link to comment Share on other sites More sharing options...
jwilli43 Posted March 8, 2015 Share Posted March 8, 2015 Gary I am working on a 1930 Continental Straight 8. Where'd you find your valves? Thanks. JW Link to comment Share on other sites More sharing options...
rustyderby Posted March 9, 2015 Author Share Posted March 9, 2015 HI,I FOUND VALVES AT A CO. CALLED PEASE . ITS ON LINE AND IN THE NEW ENGLAND AREA. I AM REPLYING WITHOUT DIGGING FOR THE FILE. NICE MAN ,I GAVE HIM THE DIMENSIONS AND HE CAMEUP WITH 8 VALVES. 4 I NEEDED TO SHORTEN . BEGGARS CAN'T BE CHEWSERS SO THEY SAY. GARY, MENTOR,OHIO 639-0858 Link to comment Share on other sites More sharing options...
old buicks Posted June 3, 2015 Share Posted June 3, 2015 Rustyderby, contact me for your Atwater Kent parts. tsvanmeet@gmail.com or 402-359-5762 Tom Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now