STAYGOLD Posted March 28, 2011 Share Posted March 28, 2011 Curious if anyone might know the correct application for this pair of Unity Spotlights with Mirrors on the opposite side.They are a matched pair, and have Unity Model #H2-C listed on them.They are also both in pretty-good shape...just don't know the correct application for them. Link to comment Share on other sites More sharing options...
keiser31 Posted March 28, 2011 Share Posted March 28, 2011 They sure do have that "Ford" or "Mercury" look to them. Link to comment Share on other sites More sharing options...
Guest raywilks Posted March 28, 2011 Share Posted March 28, 2011 1956 ford passenger, i am pretty sure. Link to comment Share on other sites More sharing options...
Guest raywilks Posted March 28, 2011 Share Posted March 28, 2011 changed my mind after checking my stock, 57 ford for sure, i do not know if merc is same, thanks. Link to comment Share on other sites More sharing options...
Guest Beladona_13 Posted April 14, 2012 Share Posted April 14, 2012 I hate to revive an old thread, but those are the exact spots that are correct for my '58 Cadillac Superior Hearse / Ambulance Combination. They wouldn't be for sale, would they? Link to comment Share on other sites More sharing options...
97volvoman Posted April 16, 2012 Share Posted April 16, 2012 You don't show what the mirrors look like on the back as they might be for a left and a right as the shades are different. I do have right side with the long shaft and mine is for sale. I don't have the bracket though Link to comment Share on other sites More sharing options...
Guest John Linden Posted April 23, 2012 Share Posted April 23, 2012 The spotlights you have pictured are Unity Model H2-C spotlights. They were not made for any particular car because Unity did not sell these to Ford or GM or MoPar. These are the up-scale spotlights that Unity sold through auto parts dealers. So you might find them on a Ford, or a Chevrolet or any car. The shaft length and the bracket are what determine what cars they can be mounted on. I don't see any brackets and the pictures aren't close enough so I can determine the shaft length. So there isn't much more I can help you with. I buy and sell a lot of spotlights. These are very popular for mounting on the 57 / 58 Cadillac and Oldsmobile but you need to have the correct shaft length and brackets so they will fit. I hope this info helps. Good Luck! John Link to comment Share on other sites More sharing options...
Guest John Linden Posted April 23, 2012 Share Posted April 23, 2012 BTW, the mirrors on these Unity H2-C spotlights are "universal". The mirror assembly is designed to be used for either LH or RH application. To change the mirror, open up the head, remove the screws that hold the mirror in place, and then rotate the mirror. Around the edge of the mirror, you will see two very small indentations or notches. These are positioned to hold the mirror in the correct position. There is a bump in the head on the bottom edge where the mirror assembly and the head meet. Just align the notch with the bump. One notch holds the mirror in the LH position and one holds it on the RH position. Once you have the mirror positioned properly, put the mounting screws back in place. John Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now