19tdave

Hello, let me know if anyone is bring 1929 Hudson parts to Hersey? Please let me know your location and cell if possible. Thanks Dave

Please let me know if anyone is bring 1929 Hudson parts to Hersey? Let me know your location and cell if possible. Thanks Dave

Thank you for the help - I appreciate it as Geo. can fix me up - Also looking for 1929 Hudson parts if you have any leads. Thanks and enjoy your summer. Dave

Thank you for the information - I will contact him tomorrow - Have a wonderful evening

Looking to buy new old stock of Timken 315 tapered bearing and 312 cup for a outer wheel bearing on a 1929 Hudson

Hi All - yes I am also on the Hudson yahoo group for Hudson's. Thanks - I have been in contact frequently with Carl and he has given me some contacts but not the correct parts available. If I do not locate the correct fender in a few months then I will need to fabricate the right side fenders. My left sides fenders were in good shape however the rights seemed to have been in a demolition derby. Thanks for all the suggestions. Dave

Hi John, yes - these parts can be fabricated and that was my next shot if I can't turn up any of these items. The right rear would be the easier than the front. The front is massive plus it has a well in it. and both have beaded and wire edges. The wire wheel hub caps could be CNC machined but maybe it would be easier just to see if a Franklin or Chrysler hub cap could be modified as they used the same wire wheel in 1929 These parts are around but the owners are passionately attached to them, which I don't blame them. Again Thank you and have a wonderful evening. Dave

John, thanks for the note and concern. Yes I am a member with the HET club and have posted with them. Yes, I am aware of the scammers out there even within the clubs I belong to. Restoring this car has been a challenge that is for sure. Thank you Dave

Parts needed to finish my 1929 Hudson 4-door standard sedan: Right rear and right front fender w/well, Hub caps for wire wheels, right side front visor bracket, Right & left spare tire brace mounts that screw through the cowl into a bracket, spare tire wheel locks and would be interested in 1929 parts car. Please contact Dave Tatich, Phone 315-365-2630, email dtatich@rochester.rr.com

Hello Carl. I would be interested in these hub caps -please call me 315-365-2630 or email dtatich@rochester.rr.com Thanks Dave

Hi Carl, could you send me the approximate overall length of the cap from edge of the threaded area to the tip of the pointed top. Thanks Dave dtatich@rochester.rr.com

Wanted 1929 Hudson 4 door sedan model R right front welled and right rear fender, complete hood wire wheel hubs and brakes. Interested in any 1929 Hudson parts, cars or leads - Thanks Dave contact dtatich@rochester.rr.com or 315-365-2630