Guest TommyH Posted December 27, 2006 Share Posted December 27, 2006 is it supoed to look like that? Link to comment Share on other sites More sharing options...
Guest TommyH Posted December 27, 2006 Share Posted December 27, 2006 anybody? please? Link to comment Share on other sites More sharing options...
Booreatta Posted December 27, 2006 Share Posted December 27, 2006 dont understand the question? photo is blurry but from what I can see it looks like a trunk latch, Is there something wrong with it? cant tell Link to comment Share on other sites More sharing options...
RayS Posted December 28, 2006 Share Posted December 28, 2006 will your teunk close and latch, or does it just bounce back when closed? if it bounces back hit the open button in the car, on the remote, or use the key as if the trunk is closed to reset it then try to close it. let me know if any of this works.Ray Link to comment Share on other sites More sharing options...
Guest TommyH Posted December 28, 2006 Share Posted December 28, 2006 here are better pix, it closes. but if i push the open button, the close one of the doors before opening the trunk, it locks. Link to comment Share on other sites More sharing options...
RayS Posted December 28, 2006 Share Posted December 28, 2006 it looks like it is damaged on the right side of the pic. and the internal spring is out of place Link to comment Share on other sites More sharing options...
Shelby Posted December 28, 2006 Share Posted December 28, 2006 It is bent and out of adjustment. Pretty easy to hook somthing on it and bend it out of wack. The spring is to pop the truck lid open. Loosen the bolt and tinker with it until it works again. Link to comment Share on other sites More sharing options...
RayS Posted December 28, 2006 Share Posted December 28, 2006 the latch housing is bent on the right side it is bent apart from the other side leaving a gap, , pliers might do the trick if your carful, I din't know if the internal spring is out of place or not I will look in the morning and see. Link to comment Share on other sites More sharing options...
Guest DTerry Posted December 28, 2006 Share Posted December 28, 2006 Yup, it's bent. I have one laying on the desk in front of me with a broken solenoid. The latch part is good, and it's a two bolt operation to swap the solenoids. PM me with your address and I'll send it to you. Link to comment Share on other sites More sharing options...
Vincent Vega Posted December 28, 2006 Share Posted December 28, 2006 Weak support struts will cause the same problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now