1941 buick century oil pump pick up fitting needed

[tblack41]

I have a 41 buick century 320 engine the pick up tube from the oil pump to the swivel float filter is broken. Pot metal is deteriorating any one have a replacement or scheme for a replacement filter screen

[jerry burger]

try bobs automobilia www.bobsautomobilia.com,or 805 434 2963.i replaced my 41 century pump with there help.also i may have the part you need,i will have to look.let me know

[tblack41]

thanks century1 if you have the part let me know ...short term I made a part...long term I would like to install the original.....not sure if this part casting number 1320256 was unique to the 320 engine or maybe it was also used on the smaller engine and perhaps for other years...anyone cross reference >>I do not have a parts book yet..thanks

[Matt Harwood]

With you two guys owning Centurys, I thought I'd point you in the direction of this link, too:

www.dualcarbregistry.org

It's for all the '41-42 dual carb Buicks. No cost. Hope this helps.

[jerry burger]

tblack41 if you would like to post up your address i think i finally found the oil pump part.