smaltzie Posted July 17, 2005 Share Posted July 17, 2005 could someone tell me where i could purchase a rear main seal for my 56 buick 322 nailhead and a good seal kit for the dynoflow transmittion? Plan on just pulling the tranny to fix both is that ok. JohnD, Mr. Earl are you out there?Thanks Randy Link to comment Share on other sites More sharing options...
The Old Guy Posted July 17, 2005 Share Posted July 17, 2005 The rear seal is a rope seal and is generic. Any good parts store should have it Link to comment Share on other sites More sharing options...
JohnD1956 Posted July 18, 2005 Share Posted July 18, 2005 Joe, isn't there a neoprene seal that is supposed to be better than the rope now?Smaltzie, be sure to mark the torque converter to the flywheel orientation. you can just dab a bit of pain on the flywheel and a matching mark on the torque converter before removal of the tranny. According to the manual these are balances together during original assembly. So you want to put them back as they were originally matched .John D Link to comment Share on other sites More sharing options...
BUICK RACER Posted July 19, 2005 Share Posted July 19, 2005 The V6 Neoprene seal is supposed to work.Lots of info HERE Also please look at the BCA OTHER LINKS PAGE for lots of cool info! Link to comment Share on other sites More sharing options...
smaltzie Posted July 19, 2005 Author Share Posted July 19, 2005 thank you so much Link to comment Share on other sites More sharing options...
smaltzie Posted July 19, 2005 Author Share Posted July 19, 2005 thanks john Link to comment Share on other sites More sharing options...
smaltzie Posted July 19, 2005 Author Share Posted July 19, 2005 thanks joe Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now