Bluesky62 Posted February 22, 2005 Share Posted February 22, 2005 I'd like to know what you folks do about "brightening up" the tri-shield emblems on your cars (on the hubcaps and on the ones behind the rear windows). Do you try to "touch them up" (and, if so, what colors of paint should I look for) or is there a place where replacements can be found? Link to comment Share on other sites More sharing options...
Guest COMPACTBC Posted March 7, 2005 Share Posted March 7, 2005 Hi BlueSky62: Please fill in the balance of your BIO for your user name so I know who and where you are. What I have used is Testers Model paint, available in model toy stores. It's not perfect, but better than nothing. Finding NOS wheelcover centers is difficult, but keep looking at Buick swap meets or post your needs on the "buy/sell" part of this forum. Link to comment Share on other sites More sharing options...
Bluesky62 Posted March 9, 2005 Author Share Posted March 9, 2005 Bruce, thank you! I was beginning to think that I had asked some kind of a no-no question, because I hadn't received one reply! I'll go get some Testors and then I think I'll ask my wife to do the application (her hands are quite a bit steadier than mine). And, yes, I'll go look for the "bio" section and get it filled in right now. Link to comment Share on other sites More sharing options...
Guest my3buicks Posted March 9, 2005 Share Posted March 9, 2005 I always like to seal with clear - seems to smooth the look out a bit. Link to comment Share on other sites More sharing options...
JohnD1956 Posted March 10, 2005 Share Posted March 10, 2005 I used nail polish on my 56 hubcap centers. My honey had tons of red polishes, in virtually every shade possible. I found a very close match, painted it on from the back and it has lasted close to 12 years now. Link to comment Share on other sites More sharing options...
Bluesky62 Posted March 13, 2005 Author Share Posted March 13, 2005 Thanks, Keith - I'll finish up with a clear (as long as it's compatible with the base paint, I should be OK, I hope!). Link to comment Share on other sites More sharing options...
Bluesky62 Posted March 13, 2005 Author Share Posted March 13, 2005 Yes, John D, I hadn't thought about nail polish, but I guess if the stuff can hold up to what most women put it through, it's pretty tough! Thanks for the suggestion! Link to comment Share on other sites More sharing options...
JohnD1956 Posted March 13, 2005 Share Posted March 13, 2005 I recall thinking I finally got something out of all the money she spent on that stuff!!! Link to comment Share on other sites More sharing options...
JohnD1956 Posted March 13, 2005 Share Posted March 13, 2005 Also keep in mind that there is nail polish remover which is labeled "non-acetone". It works and leaves plastic alone. Of course I would try to find a spare one to practice enything on before spicing up the one I planned to use. I recall one time trying to clean up the contacts on a power window switch from an 84 Chevy celebrity. Got some electrical cleaner and sprayed into what appeard to be vent holes. The unit itself appeared sealed. At least till I sprayed that stuff, then the plastic disintegrated right in my hands... wasn't sealed no more. A new switch later I learned my lesson. JD Link to comment Share on other sites More sharing options...
Bluesky62 Posted March 14, 2005 Author Share Posted March 14, 2005 Hahaha! I suppose each of us has melted/disintegrated something at one time or other! Yes, I am proceeding very slowly in restoring my Skylark - I am trying to slow down, think it through, try to anticipate all the things that can go wrong BEFORE doing something stupid. I'm moving in new territory here, JD, because I'm more used to buzzing along a little more fearlessly than I am right now. I keep thinking, "Man, if I screw this up, I might have a heckuva time getting a replacement (to say nothing of the cost!). I can't imagine what it must be like to own one of the REALLY old Buicks - I'd be a nervous wreck! Dave P. Link to comment Share on other sites More sharing options...
jaxops Posted March 14, 2005 Share Posted March 14, 2005 I must try that on my Cadillac wheelcover emblems. Great Idea. Bluesky- I also used testors silver paint to trim my dashpanel on my 70 Electra. With a toothpick, I re-lettered "BUICK" on the steering wheel. Again, not perfect, but it is legible now. Link to comment Share on other sites More sharing options...
JohnD1956 Posted March 15, 2005 Share Posted March 15, 2005 The older the car, the less parts. The less parts, the less that can go wrong, unless you have one of the 23' buicks with the sideways H shift pattern. I bet most people have a problem with that today and I wouldn't want to be looking for those parts. JD Link to comment Share on other sites More sharing options...
Bluesky62 Posted March 16, 2005 Author Share Posted March 16, 2005 With a toothpick, you say? Again, sounds like a job for my sure-fingered wife! And the older the car, the less there was to go wrong? Hmmm.... I guess I'd never thought about it that way before. Sounds kind of like Life in general, doesn't it? EVERYTHING was simpler "back then"! Link to comment Share on other sites More sharing options...
Buicks Rule Posted March 16, 2005 Share Posted March 16, 2005 Ben Franklin carries an acrylic paint Pactra might be the brand name? that is available in a large array of colors. If you are dealing with color showing through a clear lens, it works well painted on the reverse. I believe that the chemicals on the acrylic might be a little less rough on the clear plastic than some of the Testors. Testors is made for polystyrene models but who knows what some of the plastics on the older cars were made out of.There is also a stained glass spray paint--used to make clear glass look like stained glass-- available at Ben Franklins that can work very well at re-applying the irridescent finishes that were sometimes used on painted over chromed surfaces--provided you can arrange the part to be sprayable.Model car paint brushes trimmed way down in both length and width of bristles can also work well on painting small detailed ornaments. Link to comment Share on other sites More sharing options...
Bluesky62 Posted March 17, 2005 Author Share Posted March 17, 2005 Yes, I have seen this Pactra paint, too. I'll get some and try both it and a small bit of the Testors on a tiny, little corner and then see if I can tell any difference in the "acceptibility". Thank you very much for this suggestion! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now