Roadster90 Posted September 29, 2003 Share Posted September 29, 2003 Do not have a Bear Alignment handy. Does anyone know distances (distance from, height, and distance to left, etc)to align when using a brick wall. I know that is barbaric, but just need to get in ball park until I take both cars in for inspection......thanks! Link to comment Share on other sites More sharing options...
2seater Posted September 30, 2003 Share Posted September 30, 2003 I make a mark on the wall straight forward of each headlight. I make a second mark 2"-3" below the first on the verticle centerline. Back the car away from the wall 20-25ft and set the headlights on high beam. Center the bright spot as best you can on the lower of the marks on the wall. It helps to cover one headlight and work on the other one. When you flip down to the low beam, the pattern should move down and to the right (shoulder side). The area between the wall and the car should be as level as possible and the car should be loaded as normally driven. The amount of fuel in the tank doesn't make a lot of difference since it is forward of the rear axle. Link to comment Share on other sites More sharing options...
Roadster90 Posted September 30, 2003 Author Share Posted September 30, 2003 thanks Hal.....Nic Link to comment Share on other sites More sharing options...
tjenkins Posted September 30, 2003 Share Posted September 30, 2003 This'll also work:http://www.reatta.net/faq/lights.htmlNear the bottom dated 01 April 2000 by wufibug.--Tom Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now