seasand77 Posted September 27, 2003 Share Posted September 27, 2003 1971 Delta 88 convert. How do I remove the kick panels, especially the drivers side which has the hood release handle sticking through the panel? Thanks Link to comment Share on other sites More sharing options...
rocketraider Posted September 30, 2003 Share Posted September 30, 2003 Seasand, you'll see a screw in the doorjamb up toward the top of the kickpanel extension. Remove it, then take the sill plate off, and there may also be a screw in the middle of the panel behind the parking brake pedal on some body styles. There should be enough slack in the hood cable to allow removal of the kick panel; if not go underhood and uncouple the hood release cable where the inside cable and underhood cable connect but be careful not to break the plastic coupler.Pull the kickpanel out at the bottom edge, pull it back off the doorjamb pinchweld and then pull it out of the bottom of the a-pillar inside garnish molding. Reverse to install. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now