deac Posted February 16 Share Posted February 16 (edited) Since my car has various components installed or mounted that are not stock I don't know what's correct The manual is of little help. In this case it the bushing(s) for the rear shock links where they meet the frame. Below 3 pictures and I think it's the first example.... Edited February 16 by deac (see edit history) Link to comment Share on other sites More sharing options...
kgreen Posted February 16 Share Posted February 16 The correct installation is example number 2. Your shock absorber link will be subject to both upwards and downwards forces that require damping. 2 Link to comment Share on other sites More sharing options...
deac Posted February 16 Author Share Posted February 16 6 hours ago, kgreen said: The correct installation is example number 2. Your shock absorber link will be subject to both upwards and downwards forces that require damping. I was hoping you'd say EX-1 because the link where it connects to the shock arm is hitting the exhaust pipe and lower bushing will probably make it worse. So I have to take it to an exhaust shop to reroute the exhaust pipe. But your answer makes sense; thanks! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now