Wanted: 1936 Pontiac Tail Light Parts (2nd type, round)

[Bloo]

Wanted: 1936 Pontiac Tail Light Parts (2nd type, round)

 

Need left side diecast base and diecast license plate mount.

 

 

 

 

About what this should all look like (Buick shown below, but license stuff is almost the same).

 

 

Diecast licence piece would even interchange from Buick, but lacks hole to mount Pontiac emblem. Fender mount casting does not interchange.

 

 

Undroken part on right is a Buick reproduction, but unfortunately it has a casting flaw and a crack. I guess it's going back.

 

Edited August 6, 2023 by Bloo (see edit history)

[sagefinds]

I have this assembly. There is a hairline crack on both sides of the lower part of the tower. I think you could melt that back together if you were careful and formed the base metal so it didn't puddle. $85 FedEx included,PM me if interested.

[Bloo]

Still need these two castings if anyone has them, or a whole late 1936 Pontiac left tail light. These two pieces do not interchange with Buick, although a lot of the other pieces do.

 

 

 

 

 

 

 

[Bloo]

Thanks for responding!. Unfortunately it is the brackets (castings) I need badly, my light buckets are fine. I think the first one might be 39 Chevy. The lens on the last one looks like maybe a larger 1936 Buick, but I'm not sure.