Riviera63 Posted May 22, 2023 Share Posted May 22, 2023 (edited) I just replaced my 1963 Heater/AC control cover. My old cover is free, just pay shipping. I have had to do some repairs through the years but, once it is in place it looks good. I found some clips and hex screws to send along for fastening the 2 halves together. If you are looking for one in better shape, Turbinator and Gene G. sell a very nice reproduction. PM me if interested. Bill Edited June 1, 2023 by Riviera63 (see edit history) Link to comment Share on other sites More sharing options...
Riviera63 Posted May 22, 2023 Author Share Posted May 22, 2023 Here is a shot of the repro cover. The originals had a top portion which was hinged to the cover. These usually broke at the hinge and were discarded. The reproduction does not have a top portion. I fabricated mine from the side of a plastic weed killer jug which has a thickness similar to the cover. I sanded the piece so the paint would stick and not flake off. Bill 1 Link to comment Share on other sites More sharing options...
Riviera63 Posted June 1, 2023 Author Share Posted June 1, 2023 Thanks Jyrki. Enjoy. Link to comment Share on other sites More sharing options...
Finn Riv Posted July 13, 2023 Share Posted July 13, 2023 Now it’s installed. Thank you Bill! Link to comment Share on other sites More sharing options...
Riviera63 Posted July 13, 2023 Author Share Posted July 13, 2023 3 hours ago, Finn Riv said: Now it’s installed. Thank you Bill! Thanks for sharing. I am glad it made it there safely. Bill Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now