2010 Jeep

[broker-len]

Just bought a 2010 Patriot       got a owners manual that tells every thing my car does not have      does any one have a haynes manual they do not need      or any one have the same car         bobnroman@yahoo.com

[Harold]

Just bumped into this post.  

 

If you haven't found it yet, jeeppatriot.com is an active and helpful website for your Patriot.

 

We have a 2014 Patriot and followed the instructions below to get the build sheet:

 

Copy and paste the link below (minus quotes) into your browser , then replace the xxxx.... with your 17 digit VIN and you should get your vehicle's build sheet in PDF format. Letters are case sensitive. Don't include hyphen's.

"http://www.jeep.com/webselfservice/BuildSheetServlet?vin=xxxxxxxxxxxxxxxxx"

 

Hope you find this useful.

 

Regards,

Harold

 

 

 

 

[broker-len]

you said that the hubs were done on your car   did you do it or have it done     it seems to be a simple job    checked for part at dealer      $ 200,00   not sure if I should go after market

[Harold]

I don't do under-car work anymore and had the hubs done by a mechanic friend who did side work.  He left the field due to family matters.   You can probably find a local 'side-job' guy if you ask at the parts store that's selling you the bearings.  I would also strongly recommend making sure the bearings are the source of your noise.  Mis-diagnosis can be very costly (a situation I'm painfully aware of...).