BlueDevil Posted March 6, 2023 Share Posted March 6, 2023 I have a good pattern for the front floorboard that goes around the steering and pedals. The parts book lists a single board for the rear board, the one with the shifter/handbrake and the battery cut out. The book also lists a lock assembly and key. Does anyone have pictures info on that setup? Link to comment Share on other sites More sharing options...
BlueDevil Posted March 6, 2023 Author Share Posted March 6, 2023 Here are some pictures. The first one is the lock area I believe. What is the lock like? In the second picture what is the cutout shape towards the front, around the shifter/handbrake? In the third, is this correct construction? Any floorboard help appreciated. Link to comment Share on other sites More sharing options...
leomara Posted March 6, 2023 Share Posted March 6, 2023 (edited) I have a photo of what I believe the floor should look like taken from another car like ours. Probably not of the authentic design but with everything where it needs to go. If you go to the posts made by Harry J you will find other photos of his work on redoing the floorboards in his sedan. That hole you have in the middle of your cross member is not a lock it is for an exhaust cutout control, mine is mounted on a small rectangular bracket. Just an after thought, what is this lock you talked about? Edited March 6, 2023 by leomara (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now