bwalat Posted March 28, 2003 Share Posted March 28, 2003 I purchased a 4bbl intake for my 68 Delta 88 that originally came on a Toronado of that same vintage (the low rise). My question is this: acording to my shop manual, the ignition coil on the 88/98 is mounted close to the distributor while the Toro is mounted on the rear of the passenger side cylinder head.Must I relocate my coil when using the Toro intake? I think I would because it has no hole in the rear for the coil. If so, will my existing bracket work? Thanks all. Link to comment Share on other sites More sharing options...
rocketraider Posted March 29, 2003 Share Posted March 29, 2003 As far as I know, the mounting brackets are the same. You might get into some clearance issues between engine and firewall. I can't remember offhand how much space is between them on a 68 big car. Link to comment Share on other sites More sharing options...
DoubleSnorkel Posted March 30, 2003 Share Posted March 30, 2003 Usually that bracket is mounted to the back side of the head. That is if you are running stock 455 heads. Remember that those heads are reversable. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now