27 Stutz front wheel hub.

[jwbrew15]

Looking for a front hub with the wavy pattern that fits the wire wheel for 27 Stutz. The wire wheels have the special wrench that pulls out the locking center detail. jwbrew15@aol.com 563-370-6902

Edited February 20, 2022 by jwbrew15
add detail (see edit history)

[AG2]

Well, it would take more information to answer.  Is this a Right Hand front hub (with left hand threads), or a Left Hand front hub (with right hand threads)?   It sounds like you are talking about Buffalo #5 wheels and hubs with that kind of locking center.  If you have a hub cap, look around the outside (off the car, it is hidden when installed).  Does it say "B5" and some other letters/numbers?  The best would also be to post a photo of the hub, or of it's opposite side mate, to show just what you are looking for. / Tim

[jwbrew15]

The hub needed is the right front. It is the smaller Buffalo setup where Duesenberg uses the larger one. The hub unbolts from the brake drum itself. During cars life someone tightened up the nut assembly and did not have the wave portion located properly. Once driven it moved and was sloppy causing the damage.  Please contact me if you have the part. jwbrew15@aol.com.

 

[kbeach]

Believe I have what you need. 1926 - 27 Buffalo #5 hub with 14'' brake drum for the right front.

 

Edited April 11, 2022 by kbeach
added picture (see edit history)

[jwbrew15]

Received above hub drum and works great. Thanks!

[STuTZ693]

Glad to see that jwbew was able to received assistance from kbeach and get the drum.

Dan