zoltanb Posted December 20, 2021 Share Posted December 20, 2021 can someone help on how to adjust the fuel door. Currently it protrudes about 1/4" from flush, other wise it works well. Thanks Link to comment Share on other sites More sharing options...
2seater Posted December 20, 2021 Share Posted December 20, 2021 Hopefully someone with better directions chimes in but the door assembly is made of multiple pieces that each can be loosened and moved. The first thing that comes off is the black plastic inner liner to reveal the inner pieces that can be moved. I don't have a better description than that. The door on all of the Reatta's I have had don't fit perfectly, it is an essentially flat panel inset into a curved surface. The mount for the base of the arm is inside the wheelwell and is accessible behind a removable panel in the wheelwell. This area is prone to rust but only inspection will tell. Link to comment Share on other sites More sharing options...
Guest Posted December 21, 2021 Share Posted December 21, 2021 Mine did the same thing, I found one of hinges was rusted . hopefully i can find can get a fuel door and hinge assy from east coast reatta. Link to comment Share on other sites More sharing options...
2seater Posted December 21, 2021 Share Posted December 21, 2021 5 hours ago, 1989 said: Mine did the same thing, I found one of hinges was rusted . hopefully i can find can get a fuel door and hinge assy from east coast reatta. I had one do the same and I replaced it with one from Jim Finn 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now