fc170 Posted December 13, 2021 Share Posted December 13, 2021 The 1929 130 I am working on has some scoring on the cylinder walls. The plan is to have the cylinders bored/honed the minimum amount needed to clean the walls and then have custom pistons made. I have heard that Egge was making Franklin pistons but they are not listed on their website. Has anyone had pistons made by Wiseco, Ross, Arias or any of the other piston manufacturers? What clearances are you using? I am assuming .003-.004 (similar to an air cooled a VW or MC) is what I am looking for. Thanks for your help Link to comment Share on other sites More sharing options...
edinmass Posted December 13, 2021 Share Posted December 13, 2021 For years Egge pistons were junk.........now they no longer make their own pistons according to some articles, so you may as well go direct to Ross, Aries, and the others. I wouldn’t bother with off oversizes. Going to standard oversized is fine. Be sure to talk to the Franklin guys with experience and mileage for clearance on the air cooled spectrum. 4 Link to comment Share on other sites More sharing options...
Laura S Posted December 14, 2021 Share Posted December 14, 2021 Talk to Patrick Reeve at Reeve enterprise in Cazenovia NY. He has rebuilt many Franklin engines .315 655 8812 He will give you the info you need . He did my 130 Link to comment Share on other sites More sharing options...
fc170 Posted December 14, 2021 Author Share Posted December 14, 2021 Thank you, i will contact him. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now