Jacob Hilton Posted June 26, 2021 Share Posted June 26, 2021 When I try to start it it’ll crank but won’t start, I know the general problem but don’t know how to go about it there’s no spark the coil pack is new but no spark. What should I do next? Link to comment Share on other sites More sharing options...
DAVES89 Posted June 26, 2021 Share Posted June 26, 2021 Crankshaft sensor. Located under the harmonic balancer Link to comment Share on other sites More sharing options...
Jacob Hilton Posted June 26, 2021 Author Share Posted June 26, 2021 I thought that to but the original owner said he replaced that already imma go ahead and get a new one for it just in case. I’m going in blindly at this sept he didn’t say what was wrong with it. Link to comment Share on other sites More sharing options...
JohnD1956 Posted June 27, 2021 Share Posted June 27, 2021 Recommend taking the coil packs off, and then remove the spark control module from its bracket. That bracket may be a two piece unit. Take the bracket apart including off the engine, and clean all surfaces where they mate up. I use some sort of non oxidizing lubricant (Oxy-guard) when reassembling it. Also clean the bottom of the spark control module. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now