1925 Chrysler 58 front axle

[marbeton]

I disassembled the front axle and when I put it together, I found out that I don't know how to adjust the toe-in of the wheels. Don't know how much it should be?

Thank you for the advice.

marbeton

[ArticiferTom]

The long rod tie across behind tires ,has the tie rod ends . They screw in and out to adjust . Measure up from flat level surface about mid tire height in front and back . Should be between 1/16" - 1/8" toed in , front . You may find you only need to loosen both rod , jam nuts  . As most had one right and one left hand threaded . So just turning rod like a turnbuckle . will move it . Spec will be in your manual . My '31 is spec i gave you and pretty much general rule .