1st Gen Lower Trim For Bucket Seats

[XframeFX]

I have 5 Plastic Trim Pieces for Bucket Seats I'm installing. The long outboard trim for the driver's seat is obvious. However, the remaining 4, not.

Can anyone advise where the remaining 4 pieces go?

 

Thank-You,

John B.

[Riviera63]

1 hour ago, XframeFX said:

I have 5 Plastic Trim Pieces for Bucket Seats I'm installing. The long outboard trim for the driver's seat is obvious. However, the remaining 4, not.

Can anyone advise where the remaining 4 pieces go?

 

Thank-You,

John B.

 

John,

 

Follow this thread and you will find the info on how many pieces there are are, how they are arranged and where they go.

 

https://forums.aaca.org/topic/308479-65-bucket-seat-lower-trim/?tab=comments#comment-1729389

 

Bill

 

[Riviera63]

1 hour ago, Riviera63 said:

 

John,

 

Follow this thread and you will find the info on how many pieces there are are, how they are arranged and where they go.

 

https://forums.aaca.org/topic/308479-65-bucket-seat-lower-trim/?tab=comments#comment-1729389

 

Bill

 

 

John,

 

There are 4 brackets to hold the 2 trim pieces on the left side. Two brackets for each trim piece. Let me know if you need pictures of what they look like and where they are located.

 

Bill

[XframeFX]

Bill,

 

The Driver's outboard trim placement is solved thanks to that other post. And yes, all brackets are in-place for that side.

I am still scratching my head on the remaining pieces, especially #3 & 4.

I sent you a PM.

 

Thanks!

John B.