Rockne manifold part

[Thoffs]

Looking for a ring seal that fits over the baffle on the heat deflector insert that bolts into the middle top of the exhaust manifold. Please advise where I could purchase one.

 

Edited October 5, 2019 by Thoffs
Found and purchased the part. (see edit history)

[rbk]

If you look up the part number I can check my inventory.

[Thoffs]

I do not have a parts book or a parts listing for my 1933 Rockne, but I had bought a manifold heater valve gasket from Custom Antique Parts. I believe they are no longer in business do to health reasons. His part number was #510068, I don't know if this was his numbering system or Studebakers. Any help would be appreciated. Thoffs.

[starlightcoupe]

Your Model '10' Rockne is referred to as a Model 31 for parts reference in the Studebaker parts catalogs.

Is this what you are looking for?

Edited August 11, 2019 by starlightcoupe (see edit history)

[Thoffs]

Yes it is, gasket is just a ring that slides down over the baffle. Should be approximately 1.625" I.D. X 2.00" O.D. X .060" thick. If you have them I will take two, give me  a phone number and I'll call you with a credit card number. Thanks Tim.

[starlightcoupe]

2 hours ago, Thoffs said:

 If you have them I will take two,

I don't; but, now that we've identified the part as # 510068, perhaps Mr. Kapteyn does.

Stephen Allen lists them as well.

http://mystudebaker.com/heating-cooling/heat-riser-valves-related-items/

[DAVID BABCOCK]

I  BELIEVE  GASKET  CITY  FROM  CANADA  HAS  THEM.  I  BOUGHT  THE  GASKET  BELOW  IT  THAT  SEPERATES  THE  HEATER  FROM  HIM  A  WHILE  BACK.  HIS  GASKETS  ARE  N.O.S. 

[rbk]

I do not have that gasket but Stephan Allen shows them.

510068 is the correct number.