kdml Posted July 20, 2019 Share Posted July 20, 2019 I have the hardware to attach the ends of the conduit to the door and jamb, but what goes in the holes the length of the conduit to keep it closed. Thanks Doug Link to comment Share on other sites More sharing options...
RivNut Posted July 20, 2019 Share Posted July 20, 2019 Plastic pins. Flat on the exposed end, pointed on the end you poke through the holes. Link to comment Share on other sites More sharing options...
kdml Posted July 20, 2019 Author Share Posted July 20, 2019 I have what you’re describing to hold the conduit to the door. Is that right? Are they the same? Link to comment Share on other sites More sharing options...
1965rivgs Posted July 20, 2019 Share Posted July 20, 2019 Hi Doug, The original boots had "tits" as part of the molded rubber which inserted and locked into the holes. Unless one is very careful removing the locked nubbies, they break off at their base Tom Mooney Link to comment Share on other sites More sharing options...
kdml Posted July 21, 2019 Author Share Posted July 21, 2019 Thanks Tom Mine are long gone. I will grab some plastic body push pins to act as a replacement. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now